PLA Ingeo™ 6202D（粉）
93
- Properties:compostableUpdatable resourcesFood contact complianceFood contact compliance
- Usages:Short fiberTextile applicationHousehold goodsFabric
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | ASTM D1238 | 15 to 30 g/10min | |
| relative viscosity | 内部方法 | 3.1 | |
| Shrinkage rate | ASTM D2102 | < 8.0 % | |
| Melt density | 1.08 g/cm |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Denier - per filament | > 0.500 | ||
| Elongation of Fibers | ASTM D2256 | 10 to 70 % | |
| bending strength | ASTM D2256 | 2.50 to 5.00 g/denier |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Flexural modulus | ASTM D2256 | 30.0 to 40.0 g/denier |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Glass Transition Temperature | ASTM D3417 | 55.0 to 60.0 °C | |
| Crystallization peak temperature | ASTM D3418 | 155 to 170 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top