Share
Add to Compare

PA66 1300G ASAHI JAPAN

390

Form:Granules | Grade:Enhanced level

Properties:
High rigidityhigh strengthFatigue resistanceAnti creep
Typical Applications:
Electrical fieldElectronic fieldEngine hood partsAutomotive sectorcomponent
Product Description
Certificates(1)
Datasheet

Product Description

Typical Applications:Electrical field | Electronic field | Engine hood parts | Automotive sector | component
Properties:High rigidity | high strength | Fatigue resistance | Anti creep

Certificates

UL
UL

Technical Data Sheet

otherTest ConditionTest MethodTest ResultTest Unit
characteristic高刚性
Other performanceTest ConditionTest MethodTest ResultTest Unit
Extreme Oxygen IndexASTM D-286323%
impact performanceTest ConditionTest MethodTest ResultTest Unit
Impact strength of simply supported beam without notchISO 17972kJ/m²
flammabilityTest ConditionTest MethodTest ResultTest Unit
UL flame retardant rating0.75mmUL 94HB
Extreme Oxygen IndexASTM D286323%
Basic PerformanceTest ConditionTest MethodTest ResultTest Unit
Water absorption rate湿1.7%
mechanical propertiesTest ConditionTest MethodTest ResultTest Unit
bending strength23°CISO 178275Mpa
Taber abraser1000CyclesASTM D1044--mg
Elongation at Break干(湿)ASTM D-6383(5)%
Rockwell hardness干(湿)ASTM D-785120(112)R scale
Impact strength of cantilever beam gap干(湿)ASTM D-256127(147)J/m
flexural coefficient干(湿)ASTM D-7909.3(6.3)GPa
Rockwell hardness干(湿)ASTM D-78596(75)M Scale
bending strength干(湿)ASTM D-790289(216)Mpa
tensile strength干(湿)ASTM D-638186(132)Mpa
Tensile modulus23°CISO 527-210000Mpa
tensile strengthASTM D638186Mpa
tensile strengthBreak,23°CISO 527-2190Mpa
elongationBreakASTM D6383.0%
Tensile strainBreak,23°CISO 527-23.0%
Bending modulusASTM D7909300Mpa
Bending modulus23°CISO 1789000Mpa
bending strengthASTM D790289Mpa
Rockwell hardnessASTM D785M96
Bending modulusASTM D790/ISO 1789320(MPa)kg·cm/cm(J/M)ft·lb/in
bending strengthASTM D790/ISO 178289(MPa)kg·cm/cm(J/M)ft·lb/in
thermal performanceTest ConditionTest MethodTest ResultTest Unit
Hot deformation temperature0.45MPa,UnannealedASTM D648260°C
Hot deformation temperature0.45MPa,UnannealedISO 75-2/B265°C
Hot deformation temperature1.8MPa,UnannealedASTM D648250°C
Hot deformation temperature1.8MPa,UnannealedISO 75-2/A250°C
Linear coefficient of thermal expansionMDASTM D6963E-05cm/cm/°C
specific heat1590J/kg/°C
thermal conductivity0.30W/m/K
Hot deformation temperature0.46MPa,干ASTM D-648260°C
specific heat1590J/(kg.k)
thermal conductivity0.3W/(m.K)
Hot deformation temperature1.82MPa,干ASTM D-648250°C
UL flame retardant ratingUL 94HB
Linear coefficient of thermal expansionASTM D-6963×10-5/K
Combustibility (rate)UL 94HB
Hot deformation temperatureHDTASTM D648/ISO 75250℃(℉)
Linear coefficient of thermal expansionASTM D696/ISO 113593mm/mm.℃
Physical propertiesTest ConditionTest MethodTest ResultTest Unit
Shrinkage rateTDInternal Method0.90%
Shrinkage rateMDInternal Method0.40%
Shrinkage rate旭化成方法0.4/0.9%
Wear factor湿ASTM D-104415×10-6kg/1000times
Shrinkage rate吸水率(Saturation,23°C)Internal Method--%
Water absorption rateEquilibrium,23°C,50%RHISO 62--%
densityASTM D792/ISO 11831.39
Shrinkage rateASTM D9550.4-0.9%
Water absorption rateASTM D570/ISO 621.7%
Electrical performanceTest ConditionTest MethodTest ResultTest Unit
Dielectric strengthASTM D14928KV/mm
Dielectric strengthIEC 60243-128KV/mm
Compared to the anti leakage trace index3.00mmIEC 60112PLC 0
Surface resistivityASTM D2571E+15ohms
Surface resistivityIEC 600931E+15ohms
Volume resistivityASTM D2571E+15ohms·cm
Volume resistivity23°CIEC 600931E+15ohms·cm
Arc resistanceASTM D495/IEC 60112124
hardnessTest ConditionTest MethodTest ResultTest Unit
Rockwell hardnessM-SaleASTM D78596
Rockwell hardnessR-SaleASTM D785120
Rockwell hardnessM-SaleISO 2039-296
Rockwell hardnessR-SaleISO 2039-2120
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Sourcing & Prices

Selling & Verification

Explore Materials

Price Index

+86 0755 27873515

Room 906, Global Digital Building, No. 9 Gaoxin Middle 3rd Road, Maling Community, Yuehai Subdistrict, Nanshan District, Shenzhen, Guangdong Province, China