PP ISPLEN® PM284 AV
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO 1183 | 1.04 g/cm³ | |
| melt mass-flow rate | ISO 1133 | 20 g/10min | |
| Shrinkage rate | ISO 2577 | 0.63to0.75 % |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shore hardness | ISO 868 | 65 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Flexural modulus | ISO 178 | 2350 MPa | |
| tensile strength | Break | ISO 527-2 | 19.5 MPa |
| Tensile strain | Yield | ISO 527-2 | 4.0 % |
| Break | ISO 527-2 | 22 % | |
| Tensile modulus | ISO 527-2 | 2000 MPa | |
| tensile strength | Yield | ISO 527-2 | 24.0 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179 | 1.8 kJ/m² | |
| ISO 179 | 2.0 kJ/m² | ||
| ISO 179 | 3.0 kJ/m² | ||
| Impact strength of simply supported beam without notch | ISO 179 | 25 kJ/m² | |
| ISO 179 | 30 kJ/m² | ||
| ISO 179 | 50 kJ/m² | ||
| Impact strength of cantilever beam gap | ISO 180 | 4.0 kJ/m² | |
| Suspended wall beam without notch impact strength | ISO 180 | 40 kJ/m² |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ISO 75-2/A | 59.0 °C | |
| vicat | ISO 306/A120 | 148 °C | |
| ISO 306/B120 | 76.0 °C | ||
| Heat distortion temperature | ISO 75-2/B | 95.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top