TPA-ET UBE Polyamide Elastomer XPA 9048F1
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shrinkage rate | 内部方法 | 0.40 % | |
| Water absorption rate | 内部方法 | 2.4 % | |
| density | ISO 1183 | 1.02 g/cm³ | |
| Shrinkage rate | 内部方法 | 0.80 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | 200 MPa | |
| tensile strength | Yield | ISO 527-2 | 12.0 MPa |
| Tensile strain | Break | ISO 527-2 | >400 % |
| Flexural modulus | ISO 178 | 150 MPa | |
| bending strength | ISO 178 | 9.00 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of simply supported beam without notch | ISO 179 | 无断裂 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ISO 75-2/B | 67.0 °C | |
| Linear coefficient of thermal expansion | ISO 11359-2 | 1.5E-04 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top