
POM TF304 KOLON KOREA
195
Form:Granules | Grade:Injection grade
Properties:
noise reductionHigh lubricationLow friction coefficientwear resistant
Typical Applications:
Outdoor applications
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Outdoor applications |
| Properties: | noise reduction | High lubrication | Low friction coefficient | wear resistant |
Certificates
No Data...
Technical Data Sheet
| Other performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| UL flame retardant rating | UL 94 | HB | ||
| Basic Performance | Test Condition | Test Method | Test Result | Test Unit |
| Water absorption rate | Equilibrium,23℃,60%rh | ASTM D570 | 0.20 | % |
| Shrinkage rate | flow | ASTM D955 | 1.8 | % |
| density | ASTM D792 | 1.51 | g/cm³ | |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Impact strength of cantilever beam gap | 23°C | ASTM D256 | 35.0 | J/m |
| Bending modulus | 23°C | ASTM D790 | 2100 | MPa |
| tensile strength | Yield,23℃ | ASTM D638 | 45.0 | MPa |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Linear coefficient of thermal expansion | flow | ASTM D696 | 0.00013 | cm/cm/°C |
| Hot deformation temperature | 1.8MPa,Unannealed | ASTM D648 | 106 | °C |
| 0.45MPa,Unannealed | ASTM D648 | 156 | °C | |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Dielectric loss | 1E+6 Hz | ASTM D150 | 0.0060 | |
| Dielectric constant | ASTM D150 | 3.70 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.