HDPE

HDPE Quadrant EPP Sanalite® HDPE Mitsubishi Chemical Advanced Materials

Usages:
kitchenware
Compare

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result
Impact strength of cantilever beam gap		ASTM D256A	69 J/m

flammability	Test Condition	Test Method	Test Result
UL flame retardant rating	3.2mm	UL 94	HB

mechanical properties	Test Condition	Test Method	Test Result
Tensile modulus		ASTM D638	1380 MPa
tensile strength	Ultimate	ASTM D638	31.7 MPa
elongation	Break	ASTM D638	400 %
Bending modulus		ASTM D790	1200 MPa
bending strength	Yield	ASTM D790	31.7 MPa
Compressive modulus		ASTM D695	689 MPa
compressive strength	10%Strain,23°C	ASTM D695	31.7 MPa
Friction coefficient	Steel - Static	Internal Method	0.20

thermal performance	Test Condition	Test Method	Test Result
Crystallization peak temperature	DSC	ASTM D3418	127 °C
Linear coefficient of thermal expansion	MD2：-40to149°C	ASTME831	1.1E-04 cm/cm/°C
Hot deformation temperature	1.8MPa,Unannealed	ASTM D648	80.0 °C
Maximum operating temperature LongTerm, Air			82 °C

Physical properties	Test Condition	Test Method	Test Result
density		ASTM D792	0.960 g/cm³
Water absorption rate	24hr	ASTM D570	<0.010 %
Water absorption rate	Water absorption rate	Saturation	ASTM D570	<0.010 %

Electrical performance	Test Condition	Test Method	Test Result
Surface resistivity		ASTM D257	>1.0E+15 ohms

hardness	Test Condition	Test Method	Test Result
Shore hardness	ShoreD	ASTM D2240	70

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top