HDPE SNOLEN® EF 0.33/51
0
- Usages:Sheetpackagingfilm
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO1183 | 0.947到0.951 g/cm³ | |
| melt mass-flow rate | ISO1133 | 6.0到10 g/10min | |
| ISO1133 | 0.23到0.33 g/10min | ||
| ISO1133 | 25.0到33.0 |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ISO868 | 60 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile stress | Yield | ISO527-2/50 | 24.0 MPa |
| Break | ISO527-2/50 | 35.0 MPa |
| film | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile stress | ISO527-3/50 | 40.0 MPa | |
| elongation | ISO527-3/50 | 400 % | |
| ISO527-3/50 | 450 % | ||
| Falling hammer impact | ASTMD1709 | 220 g | |
| Available film thickness | 10to200µm | ||
| Tensile stress | ISO527-3/50 | 45.0 MPa | |
| ElmendorfTearStrength | 509.9 g/2.5cm | ||
| 1147.2 g/2.5cm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| brittle temperature | ASTMD746 | <-80.0 °C | |
| vicat | ISO306/B50 | 75.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top