PA6 Ravamid® BGB30 BK45 Entec Polymers

Properties:

Filler glass beads 30% filler by weight

Typical Applications:

General

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	General
Properties:	Filler \| glass beads \| 30% \| filler by weight

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	30	kJ/m²
Charpy Notched Impact Strength	23°C	ISO 179/1eA	6.0	kJ/m²
Impact strength of cantilever beam gap	23°C	ISO 180/1A	6.0	kJ/m²
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	23°C	ASTM D256	6.00	kJ/m²
flammability	Test Condition	Test Method	Test Result	Test Unit
Burning wire flammability index	2.0mm	IEC 60695-2-12	650	°C
UL flame retardant rating	3.2mm	UL 94	HB
UL flame retardant rating	UL flame retardant rating	1.6mm	UL 94	HB
Burning rate	3.20mm	FMVSS302	<100	mm/min
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Bending modulus		ASTMD790	3000	MPa
elongation	Break	ASTMD638	10	%
tensile strength	Break	ASTMD638	75.0	MPa
tensile strength	tensile strength	Yield	ASTMD638	80.0	MPa
Tensile modulus		ASTMD882	3500	MPa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Vicat softening temperature		ISO 306/B50	205	°C
Hot deformation temperature	1.8MPa,Unannealed	ASTMD648	80.0	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate	MD	ASTM D955	0.90to1.2	%
Humidity		ISO 960	<0.15	%
density		ASTMD792	1.35	g/cm³

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top