
PUR-Ether//TDI BL 16 CHEMTURU USA
Product Description
Certificates(0)
Datasheet
Product Description
Certificates
No Data...
Technical Data Sheet
| Uncured Properties | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Curing time | 130°C | 1.0 | hr | |
| Filling analysis | Test Condition | Test Method | Test Result | Test Unit |
| Brookfield viscosity | 50°C | 7.50to15.0 | Pa·s | |
| elastomer | Test Condition | Test Method | Test Result | Test Unit |
| elongation | Break | ASTM D412 | 460 | % |
| tensile strength | ASTM D412 | 37.2 | MPa | |
| 300%Strain | ASTM D412 | 24.8 | MPa | |
| 100%Strain | ASTM D412 | 11.4 | MPa | |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Taber abraser | 1000Cycles,1000g,H-22Wheel | 112 | mg | |
| thermosetting | Test Condition | Test Method | Test Result | Test Unit |
| Thermosetting components | Hardener | 按重量计算的混合比:12 | ||
| 按重量计算的混合比 | 100 | |||
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| density | ASTM D792 | 1.04to1.08 | g/cm³ | |
| hardness | Test Condition | Test Method | Test Result | Test Unit |
| Shore hardness | ShoreD | ASTM D2240 | 48 | |
| ShoreA | ASTM D2240 | 92 | ||
| aging | Test Condition | Test Method | Test Result | Test Unit |
| Volume change | 50°C,168hr,ASTM标准油(3号) | 6.8 | % | |
| 50°C,168hr,在基准燃料B中 | 25 | % | ||
| Supplementary Information | Test Condition | Test Method | Test Result | Test Unit |
| Isocyanate (NCO) content | Blocked | 5.3to5.8 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.