
PC RS-3001R MITSUBISHI ENGINEERING JAPAN
64
Form:Granules | Grade:Injection grade
Properties:
Radiation shielding
Typical Applications:
Electrical applicationsAutomotive Applications
Product Description
Certificates(3)
Datasheet
Product Description
| Typical Applications: | Electrical applications | Automotive Applications |
| Properties: | Radiation shielding |
Certificates
TDS

TDS
Technical Data Sheet
| machinability | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Mold temperature | 70-100 | °C | ||
| Screw speed | 50-100 | rpm | ||
| Processing temperature | 270-300 | °C | ||
| 260-290 | °C | |||
| Dry conditions | 热风干燥 120℃---約4-8小时 | |||
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Elongation at Break | ASTM D638/ISO 527 | 124 | % | |
| bending strength | ASTM D790/ISO 178 | 90 | kg/cm²(MPa)[Lb/in²] | |
| Bending modulus | ASTM D790/ISO 178 | 2100 | kg/cm²(MPa)[Lb/in²] | |
| Tensile modulus | ASTM D638/ISO 527 | 2500 | kg/cm²(MPa)[Lb/in²] | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Linear coefficient of thermal expansion | ASTM D696/ISO 11359 | 6.5E-05 | mm/mm.℃ | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Shrinkage rate | ASTM D955 | 0.5 - 0.7 | % | |
| density | ASTM D792/ISO 1183 | 1.21 | ||
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Volume resistivity | ASTM D257/IEC 60093 | 3E+14 | Ω.cm | |
| Surface resistivity | ASTM D257/IEC 60093 | 6E+15 | Ω |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.