PE Modified Plastics MPE-FG5
0
- Properties:Fillerglass fiber reinforced material50%filler by weight
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D792 | 0.988 g/cm³ | |
| Shrinkage rate | ASTM D955 | 0.50 % | |
| Water absorption rate | ASTM D570 | 0.020 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256 | 69 J/m |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| elongation | Yield | ASTM D638 | 6.5 % |
| Flexural modulus | ASTM D790 | 1720 MPa | |
| bending strength | Yield | ASTM D790 | 414 MPa |
| compressive strength | ASTM D695 | 29.0 MPa | |
| Tensile modulus | ASTM D638 | 1380 MPa | |
| tensile strength | Yield | ASTM D638 | 35.9 MPa |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Hot deformation temperature (HDT) | ASTM D648 | 73.9 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top