PSU S2010 BASF GERMANY

Form：Granules | Grade：Injection grade

Properties:

High temperature resistanwear resistant

Typical Applications:

Food containersMedical equipment

Supplier(1)

Product Description

Certificates(1)

Datasheet

Product Description

Typical Applications:	Food containers \| Medical equipment
Properties:	High temperature resistan \| wear resistant

Certificates

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Charpy Notched Impact Strength	-30°C	ISO 179	6.0	kJ/m²
Charpy Notched Impact Strength	Charpy Notched Impact Strength	23°C	ISO 179	5.5	kJ/m²
Impact strength of simply supported beam without notch	-30°C	ISO 179	NoBreak
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	23°C	ISO 179	NoBreak
Impact strength of cantilever beam gap	-30°C	ISO 180	6.0	kJ/m²
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	23°C	ISO 180	5.5	kJ/m²
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	1.6mm	UL 94	HB
UL flame retardant rating	UL flame retardant rating	3.2mm	UL 94	V-2
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus	23°C	ISO 527-2	2550	Mpa
tensile strength	Yield,23°C	ISO 527-2	75.0	Mpa
Tensile strain	Yield,23°C	ISO 527-2	6.0	%
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	1.8MPa,Unannealed	ISO 75-2/A	176	°C
Linear coefficient of thermal expansion	MD		5.3E-05	cm/cm/°C
RTI Elec	1.6mm	UL 746	155	°C
RTI Elec	RTI Elec	3.2mm	UL 746	155	°C
RTI Imp	1.6mm	UL 746	130	°C
RTI Imp	RTI Imp	3.2mm	UL 746	130	°C
RTI Str	1.6mm	UL 746	155	°C
RTI Str	RTI Str	3.2mm	UL 746	155	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	Saturation,23°C	ISO 62	0.80	%
Water absorption rate	Water absorption rate	Equilibrium,23°C,50%RH	ISO 62	0.30	%
density		ISO 1183	1.23	g/cm³
Melt Volume Flow Rate (MVR)	360°C/10.0kg	ISO 1133	90.0	cm3/10min
Shrinkage rate	TD	ISO 294-4	0.72	%
Shrinkage rate	Shrinkage rate	MD	ISO 294-4	0.68	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Surface resistivity		IEC 60093	>1.0E+15	ohms
Volume resistivity		IEC 60093	>1.0E+13	ohms·cm
Dielectric strength		IEC 60243-1	40	KV/mm
Dielectric constant	100Hz	IEC 60250	3.10
Dielectric constant	Dielectric constant	1MHz	IEC 60250	3.10
Dissipation factor	100Hz	IEC 60250	8E-04
Dissipation factor	Dissipation factor	1MHz	IEC 60250	6.4E-03
Compared to the anti leakage trace index		IEC 60112		V
hardness	Test Condition	Test Method	Test Result	Test Unit
Ball Pressure Test		ISO 2039-1	135	Mpa

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top