Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D792 | 2.24 g/cm³ |
| Water absorption rate | | ASTM D570 | 0.010 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Shore hardness | | ASTM D2240 | 58 |
| optical performance | Test Condition | Test Method | Test Result |
|---|
| refractive index | | ASTM D542 | 1.376 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL 94 | V-0 |
| Limiting Oxygen Index | | ASTM D2863 | 95 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ASTM D638 | 552 MPa |
| compressive strength | | ASTM D695 | 24.1 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTM D256 | 190 J/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Volume resistivity | | ASTM D257 | 1E+18 ohms·cm |
| dielectric strength | | ASTM D149 | 350 kV/mm |
| dielectric strength | | ASTM D149 | 160 kV/mm |
| dielectric strength | | ASTM D149 | 110 kV/mm |
| dielectric strength | | ASTM D149 | 61 kV/mm |
| dielectric constant | | ASTM D150 | 2.05 |
| dielectric constant | | ASTM D150 | 2.05 |
| Dissipation Factor | | ASTM D150 | 2E-04 |
| Dissipation Factor | | ASTM D150 | 2E-04 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Continuous use temperature | | ASTM D794 | 204to260 °C |
| melting temperature | | | 317to337 °C |
| Linear coefficient of thermal expansion | | ASTM D696 | 9E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare