LLDPE DOWLEX™ 2740G DOW SPAIN
9
- Usages:film
CompareTechnical Data Sheet
| optical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Melt Temperature | 190-240 °C |
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D-792 | 0.94 g/m3 | |
| melt mass-flow rate | ISO 1133 | 1 g/10min | |
| film thickness | 50 um |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus (TD) | ISO 527-3 | 420 Mpa | |
| Tensile modulus (MD) | ISO 527-3 | 370 Mpa | |
| Tensile yield stress (TD) | ISO 527-3 | 25 Mpa | |
| Tensile yield stress (MD) | ISO 527-3 | 26 Mpa | |
| Tensile fracture stress (TD) | ISO 527-3 | 43 Mpa | |
| Tensile fracture stress (MD) | ISO 527-3 | 44 Mpa | |
| Tensile elongation at break (TD) | ISO 527-3 | 740 % | |
| Tensile elongation at break (MD) | ISO 527-3 | 690 % | |
| Falling hammer impact | ISO 7765-1/A | 120 g | |
| Elmendorf Tear Strength (TD) | ASTM D-1922 | 240 g | |
| Elmendorf Tear Strength (MD) | ASTM D-1922 | 130 g |
| Other performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ASTM D-5748 | 2 J | ||
| Movie Piercing Force | ASTM D-5748 | 46 N | |
| Movie Piercing Resistance | ASTM D-5748 | 4 J/cm³ |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| vicat | ASTM D-1525 | 125 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top