Epoxy EPO-TEK® E4110-PFC Epoxy Technology Inc.

Product Description

Certificates(0)

Datasheet

Product Description

Certificates

No Data...

Technical Data Sheet

Cured Properties	Test Condition	Test Method	Test Result	Test Unit
Volume resistivity	23°C		<5.0E-4	ohms·cm
Shore hardness	ShoreD		68
LapShearStrength	23°C		8.62	MPa
Uncured Properties	Test Condition	Test Method	Test Result	Test Unit
Color	--5		Silver
Color	Color	--6		Silver
density	PartA		3.25	g/cm³
	density	PartB		3.96	g/cm³
		density	粘度7(23°C)		50to60	Pa·s
			density	固化时间(80°C)		3.0	hr
			density	density	Pot Life		120to180	min
thermosetting	Test Condition	Test Method	Test Result	Test Unit
Thermosetting components	PartB		按重量计算的混合比:1.0
	Thermosetting components	Shelf Life(23°C)		52	wk
	Thermosetting components	Thermosetting components	PartA		按重量计算的混合比:3.0
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Glass transition temperature			>40.0	°C
Linear coefficient of thermal expansion	MD：--3		4.8E-05	cm/cm/°C
	Linear coefficient of thermal expansion	MD：--4		2.1E-04	cm/cm/°C
	Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	MD：导热系数		1.6	W/m/K
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Particle size distribution			<20.0	µm
Ionic type	Cl-		32	ppm
	Ionic type	K+		2	ppm
		Ionic type	Na+		13	ppm
		Ionic type	Ionic type	NH4+		20	ppm
Supplementary Information	Test Condition	Test Method	Test Result	Test Unit
DegradationTemperature		TGA	337	°C
Shear Strength	23°C		11.7	MPa
operate temperature	Continuous		-55-150	°C
	operate temperature	Intermittent		-55-250	°C
		operate temperature	StorageModulus(23°C)		1.53	GPa
		operate temperature	operate temperature	ThixotropicIndex		3.30
weight loss on heating	200°C		0.37	%
	weight loss on heating	250°C		0.88	%
	weight loss on heating	weight loss on heating	300°C		1.4	%

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top