PBT B4406G6 Q798 BASF MALAYSIA

Form：Granules | Grade：Injection grade

Properties:

Flame retardantGlass fiber reinforced Flame retardantGood dimensional stabilit Flame retardantGood dimensional stabilit

Typical Applications:

Electrical componentsswitchLaptop caseFor plug-in connectorsCoil holderLamp assemblyMotor componentsAutomotive Electrical SystemsFor plug-in connectorsCoil holderLamp assemblyMotor componentsAutomotive Electrical Systems

Supplier(1)

Product Description

Certificates(1)

Datasheet

Product Description

Typical Applications:	Electrical components \| switch \| Laptop case \| For plug-in connectors \| Coil holder \| Lamp assembly \| Motor components \| Automotive Electrical Systems \| For plug-in connectors \| Coil holder \| Lamp assembly \| Motor components \| Automotive Electrical Systems
Properties:	Flame retardant \| Glass fiber reinforced \| Flame retardant \| Good dimensional stabilit \| Flame retardant \| Good dimensional stabilit

Certificates

Technical Data Sheet

Other performance	Test Condition	Test Method	Test Result	Test Unit
Stickiness		ISO 307	108	ml/g
Basic Performance	Test Condition	Test Method	Test Result	Test Unit
Melt Volume Flow Rate (MVR)		ISO 1133	17	CM
Melt flow temperature			260-280	°C
density		ISO 1183	1.68
Water absorption rate	23℃在水中，Saturation	DIN 53495/1L	0.4	%
Water absorption rate	Water absorption rate	230℃/50%相对湿度，Saturation		0.2	%
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Charpy Notched Impact Strength	23℃,干/湿	ISO 179/1eA	10	KJ/m
Tensile modulus	干/湿	ISO 527-2	11700	Mpa
Tensile stress	干/湿	ISO 527-2	154	Mpa
Charpy Notched Impact Strength	23℃，干/湿	ISO 179/1eU	61	KJ/m
thermal performance	Test Condition	Test Method	Test Result	Test Unit
flammability	1.6mm	UL 94	94V-0	CLASS
Hot deformation temperature	1.80MPa,干	ISO 75-2	195	°C
Melting temperature		ISO 3146	220-225	°C
Mold temperature range			60-90	°C
Hot deformation temperature	0.45MPa,Dry	ISO 75-2	220	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate	Dry		0.2/0.9	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Compared to the Leakage Traceability Index (CTI)	干/湿	IEC 112	CTI200

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top