TPEE P-70B TOYOBO JAPAN

Form：Granules | Grade：Injection grade

Typical Applications:

currency

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:

currency

Certificates

No Data...

Technical Data Sheet

flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating		UL 94	HB
elastomer	Test Condition	Test Method	Test Result	Test Unit
tensile strength	50%Strain	ASTM D412	10.8	Mpa
tear strength		ASTM D624	122	kN/m
Permanent compression deformation		ASTM D395	55	%
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength	Yield	ASTM D638	30.0	Mpa
elongation	Break	ASTM D638	550	%
Bending modulus		ASTM D790	108	Mpa
Compressive modulus		ASTM D695	9.20	Mpa
Taber abraser	1000Cycles	ASTM D1044	15.0	mg
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	1.8MPa,Unannealed	ASTM D648	74.0	°C
Brittle temperature		ASTM D746	-65.0	°C
Vicat softening temperature		ASTM D1525	170	°C
Melting temperature		DSC	200	°C
Linear coefficient of thermal expansion	MD	ASTM D696	1.6E-04	cm/cm/°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate	230°C/2.16kg	ASTM D1238	20	g/10min
Shrinkage rate	MD：2.00mm	ASTM D955	1.0	%
Water absorption rate	Equilibrium,23°C,65%RH	ASTM D570	0.43	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Volume resistivity		ASTM D257	6E+13	ohms·cm
Dielectric strength		ASTM D149	25	KV/mm
hardness	Test Condition	Test Method	Test Result	Test Unit
Shore hardness	ShoreD	ASTM D2240	46

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top