Share
Add to Compare
plas
Material Selector
Log In
CategoriesAll
​Plastic MaterialsAdditivesMasterbatchMaterial SelectorPrice IndexTrade DataPlastic NewsAbout Us
Home
Plastic Datasheets
PA6

PA6 CM1017 TORAY JAPAN

284

Form：Granules | Grade：Injection grade

Properties:
High hardness
Typical Applications:
Automotive sectorShellElectrical componentsElectrical appliances
Supplier(4)
Product Description
Certificates(0)
Datasheet
Alternative(2)

Product Description

Typical Applications:Automotive sector | Shell | Electrical components | Electrical appliances
Properties:High hardness

Certificates

No Data...

Technical Data Sheet

impact performanceTest ConditionTest MethodTest ResultTest Unit
Impact strength of simply supported beam without notch-40°C无断裂--
Impact strength of simply supported beam without notch23°C无断裂--
flammabilityTest ConditionTest MethodTest ResultTest Unit
UL flame retardant rating0.79mmV-2--
Basic PerformanceTest ConditionTest MethodTest ResultTest Unit
Water absorption rate23℃，24hrASTM D-5703.5%水｜-%
Water absorption rate23℃，24hrASTM D-570无水｜1.8%
mechanical propertiesTest ConditionTest MethodTest ResultTest Unit
Bending modulus80℃ASTM D-7903.5%水｜4000kg/cm2
Bending modulus80℃ASTM D-790无水｜8000kg/cm2
Rockwell hardness23℃ASTM D-7853.5%水｜90R-标度
bending strength23℃ASTM D-7903.5%水｜450kg/cm2
bending strength23℃ASTM D-790无水｜1100kg/cm2
Rockwell hardness23℃ASTM D-7853.5%水｜-M-标度
Rockwell hardness23℃ASTM D-785无水｜83M-标度
compressive strength23℃ASTM D-6953.5%水｜-kg/cm2
compressive strength23℃ASTM D-695无水｜890kg/cm2
Bending modulus23℃ASTM D-7903.5%水｜10000kg/cm2
Bending modulus23℃ASTM D-790无水｜29000kg/cm2
Rockwell hardnessASTM D78583
Elongation at Break23℃ASTM D-638无水｜180%
Elongation at Break23℃ASTM D-6383.5%水｜<200%
Shear strength23℃ASTM D-732无水｜740kg/cm2
Shear strength23℃ASTM D-7323.5%水｜690kg/cm2
bending strength80℃ASTM D-790无水｜500kg/cm2
bending strength80℃ASTM D-7903.5%水｜300kg/cm2
bending strength-40℃ASTM D-790无水｜1500kg/cm2
bending strength-40℃ASTM D-7903.5%水｜1450kg/cm2
Rockwell hardness23℃ASTM D-785无水｜119R-标度
tensile strength80℃，YieldASTM D-6383.5%水｜220kg/cm2
Impact strength of cantilever beam gap23℃，Unnotched1/8无水｜无断裂kg.cm/cm
Impact strength of cantilever beam gap23℃，Unnotched1/83.5%水｜-kg.cm/cm
tensile strength23℃，YieldASTM D-638无水｜820kg/cm2
tensile strength23℃，YieldASTM D-6383.5%水｜420kg/cm2
tensile strength80℃，YieldASTM D-638无水｜320kg/cm2
Bending modulus-40°CMPa39003600
tensile strength-40，YieldASTM D-638无水｜1230kg/cm2
tensile strength-40，YieldASTM D-6383.5%水｜1150kg/cm2
Bending modulus-40℃ASTM D-790无水｜40000kg/cm2
Bending modulus-40℃ASTM D-7903.5%水｜37000kg/cm2
tensile strength80°CMPa30.020.0
Tensile strainYield,23°C%1.5--
Tensile strainBreak,23°C%38
Bending modulus23°CMPa30001000
Bending modulus80°CMPa800400
bending strength-40°CMPa145140
bending strength23°CMPa12045.0
bending strength80°CMPa50.030.0
Compressive stress23°CMPa85.0--
shear strength23°CMPa75.070.0
Taber abraser1000Cyclesmg3.00to4.00--
Friction coefficient vs. Metal0.15to0.20--
Impact strength of cantilever beam gapUnnotched1/2"，23℃无水｜5kg.cm/cm
Impact strength of cantilever beam gapUnnotched1/2"，23℃3.5%水｜40kg.cm/cm
Impact strength of cantilever beam gap-40℃，Unnotched1/2无水｜3.5kg.cm/cm
Impact strength of cantilever beam gap-40℃，Unnotched1/23.5%水｜15kg.cm/cm
tensile strength-40°CMPa120115
tensile strength23°CMPa85.040.0
tensile strength23℃，BreakASTM D-638无水｜20kg/cm2
tensile strength23℃，BreakASTM D-6383.5%水｜-kg/cm2
thermal performanceTest ConditionTest MethodTest ResultTest Unit
Hot deformation temperatureHDTASTM D-6483.5%水｜-°C
Hot deformation temperatureHDTASTM D-648无水｜190°C
specific heat3.5%水｜-Cal/g.°C
specific heat无水｜0.46Cal/g.°C
Linear coefficient of thermal expansionASTM D-6963.5%水｜-
Linear coefficient of thermal expansionASTM D-696无水｜810-5cm/cm.℃
thermal conductivity3.5%水｜-Kcal/m.hr.°C
thermal conductivity无水｜0.18Kcal/m.hr.°C
UL-94 flame retardant gradeUL 94无水｜V-2(1/16")
UL-94 flame retardant gradeUL 943.5%水｜-
Melting temperature225℃（℉）
Hot deformation temperatureHDTASTM D648/ISO 75190℃（℉）
Melting temperature差示扫描测热计DSC法225°C
Hot deformation temperature18.6kg/cm2ASTM D-648无水｜190°C
Hot deformation temperature18.6kg/cm2ASTM D-6483.5%水｜-°C
thermal conductivityW/m/K0.25--
Hot deformation temperature0.45MPa,Unannealed°C190--
Melting temperature°C225--
Linear coefficient of thermal expansionMDcm/cm/°C8E-05--
specific heatJ/kg/°C1900--
Physical propertiesTest ConditionTest MethodTest ResultTest Unit
Water absorption rateASTM D570/ISO 621.8%
densityASTM D792/ISO 11831.13
Shrinkage rateMD：3.00mm4%1.0-1.6--
Water absorption rate23°C,24hr%1.8--
Water absorption rateSaturation,23°C%11--
Shrinkage rateMD：1.00mm3%0.50-1.0--
Taber abraser1000g,CS-17ASTM D-1044无水｜3-4mg/1000次
Taber abraser1000g,CS-17ASTM D-10443.5%水｜-mg/1000次
Electrical performanceTest ConditionTest MethodTest ResultTest Unit
Dielectric constant106HzASTM D-150无水｜3.4
Volume resistivityASTM D257/IEC 6009310^12-13Ω.cm
Volume resistivityASTM D-257无水｜1014-1015Ω.cm
Volume resistivityASTM D-2573.5%水｜1011-1012Ω.cm
Dissipation factor106HzASTM D-150无水｜0.03
Dissipation factor106HzASTM D-1503.5%水｜-
Dielectric strength1/8"ASTM D-149无水｜20KV/mm
Dielectric strength1/8"ASTM D-1493.5%水｜-KV/mm
Dissipation factor50HzASTM D-150无水｜0.07
Dissipation factor50HzASTM D-1503.5%水｜-
Arc resistancesec120--
Volume resistivityohms·cm1.0E+14-1.0E+151.0E+11到1.0E+12
Dielectric strengthkV/mm20--
Dielectric constant23°C,50Hz4.109.00
Dielectric constant23°C,1kHz3.908.00
Dielectric constant23°C,1MHz3.404.50
Dissipation factor23°C,50Hz0.0700.10
Dissipation factor23°C,1kHz0.0600.11
Dissipation factor23°C,1MHz0.0300.13
Dissipation factor103HzASTM D-150无水｜0.06
Dissipation factor103HzASTM D-1503.5%水｜-
Arc resistance1/8"ASTM D-150无水｜121
Arc resistance1/8"ASTM D-1503.5%水｜-
Dielectric constant50HZASTM D-150无水｜4.1
Dielectric constant50HZASTM D-1503.5%水｜-
Compared to the Leakage Traceability Index (CTI)UL 746无水｜≤600V
Compared to the Leakage Traceability Index (CTI)UL 7463.5%水｜-V
Dielectric constant106HzASTM D-150无水｜3.9
Dielectric constant106HzASTM D-1503.5%水｜-
hardnessTest ConditionTest MethodTest ResultTest Unit
Rockwell hardnessR-Sale,23°C119
Rockwell hardnessR-Sale,80°C83--
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Supplier Join

Contact Us

Get App

Top

Sourcing & Prices

Selling & Verification

Explore Materials

Price Index

+86 0755 27873515

Room 906, Global Digital Building, No. 9 Gaoxin Middle 3rd Road, Maling Community, Yuehai Subdistrict, Nanshan District, Shenzhen, Guangdong Province, China