PP H35Z-00 INEOS USA

Form：Granules | Grade：Extrusion grade

Properties:

High toughnessThermal stability

Typical Applications:

containerchipThin walled products

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	container \| chip \| Thin walled products
Properties:	High toughness \| Thermal stability

Certificates

No Data...

Technical Data Sheet

other	Test Condition	Test Method	Test Result	Test Unit
characteristic			高熔指、快速周期时间、良好的成型性能.在薄壁件、低静态电荷、改善韧性
purpose			消费品.家用器皿
Basic Performance	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate	230℃,2.16kg	ASTM D-1238	35	g/10min
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength	Yield	ASTM D-638	37	Mpa
elongation at yield		ASTM D-638	7	%
elongation	Break	ASTM D-638	50	%
Bending modulus		ASTM D-790A	210	Mpa
tensile strength		ASTM D638	38.6	Mpa
elongation at yield		ASTM D638	8	%
Elongation at Break			30	%
Bending modulus	0.455 MPa	ASTM D790A	1655	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	66psi	ASTM D-648	121	°C
Hot deformation temperature	Hot deformation temperature	455kPa	ASTM D648	121	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate		ASTM D1238/ISO 1133	35	g/10min
melt mass-flow rate	melt mass-flow rate	230℃/2.16 kg	ASTM D1238	35	g/10min

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top