PP EP300K LYONDELLBASELL SAUDI

Form：Granules

Properties:

Low temperature resistancHigh rigidityheat-resistingHigh impact resistanceGood stiffnessLow trafficLow temperature impact re

Typical Applications:

Plastic boxcontainerHousehold appliancesPackaging boxHome Furnishings

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Plastic box \| container \| Household appliances \| Packaging box \| Home Furnishings
Properties:	Low temperature resistanc \| High rigidity \| heat-resisting \| High impact resistance \| Good stiffness \| Low traffic \| Low temperature impact re

Certificates

No Data...

Technical Data Sheet

Basic Performance	Test Condition	Test Method	Test Result	Test Unit
density		ISO 1183	0.9	g/cm³
Melt Volume Flow Rate (MVR)		ISO 1133	5.4	cm3/10min
v		ISO 1133	4	g/10min
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Impact strength of simply supported beam without notch	-20℃	ISO 179/1eU	80
	Impact strength of simply supported beam without notch	0℃	ISO 179/1eU	140
		Impact strength of simply supported beam without notch	-20℃	ISO 179/1eA	4
			Impact strength of simply supported beam without notch	0℃	ISO 179/1eA	5.5
			Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	23℃	ISO 179/1eA	10.5
Tensile strain	Break	ISO 527	50	%
Tensile strain	Tensile strain	Yield	ISO 527	7	%
tensile strength	Yield	ISO 527	27	Mpa
Tensile modulus		ISO 527	1200	Mpa
Ball Pressure Test		ISO 2039-1	53
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Vicat softening temperature		ISO 306/B50	71	°C
Vicat softening temperature	Vicat softening temperature		ISO 306/A50	150	°C
Hot deformation temperature	0.45Mpa, Unannealed	ISO 75B-1	75	°C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top