'%20/%3e%3cg%20opacity='1'%20transform='translate(150.5%200)%20rotate(0)'%3e%3cpath%20id='路径%204'%20fill-rule='evenodd'%20style='fill:%23C70000'%20opacity='1'%20d='M494%20472.601L487%20410.101L460%20472.601L494%20472.601Z'%3e%3c/path%3e%3cpath%20id='路径%203'%20fill-rule='evenodd'%20style='fill:%23003686'%20opacity='1'%20d='M80%20620.761C152%20676.261%20250%20670.761%20264.5%20670.761C351%20664.261%20412.5%20636.261%20443.5%20620.761C536%20572.261%20580.45%20516.261%20599.5%20492.261C566.05%20492.261%20483.5%20492.261%20465.5%20492.261C408%20532.761%20385.5%20541.761%20369%20550.261C262.5%20599.761%20214%20591.261%20184%20591.261C81%20584.761%2024.3%20510.211%200%20478.261C23%20580.261%2067.5%20609.261%2080%20620.761Z'%3e%3c/path%3e%3cpath%20id='路径%202'%20fill-rule='evenodd'%20style='fill:%23003686'%20opacity='1'%20d='M427.998%202.26C325.498%2014.26%20222.068%2073.64%20247.998%2063.76C384.498%2011.76%20427.998%2024.76%20437.998%2024.76C526.998%2041.76%20559.998%2085.76%20568.998%2095.76C606.498%20142.26%20611.398%20187.06%20613.498%20206.26C631.458%20206.26%20679.498%20206.26%20703.998%20206.26C692.998%20109.26%20633.378%2063.91%20622.998%2056.26C563.998%2012.76%20513.248%205.41%20491.498%202.26C467.498%20-2.24%20437.168%201.19%20427.998%202.26Z'%3e%3c/path%3e%3cpath%20id='路径%201'%20fill-rule='evenodd'%20style='fill:%23C70000'%20opacity='1'%20d='M232%20206.763C243%20178.763%20262%20156.763%20273.5%20140.263C329%2080.2634%20374%2069.7634%20410.5%2061.2634C446.5%2052.2634%20499%2061.2634%20504.5%2061.2634C446%2039.7634%20393%2040.7634%20387.5%2040.7634C308.5%2047.2634%20259.5%2075.2634%20237%2088.7634C162.5%20135.263%20122.95%20185.313%20106%20206.763C139.86%20206.763%20221.5%20206.763%20232%20206.763Z'%3e%3c/path%3e%3c/g%3e%3cpath%20id='减去顶层'%20fill-rule='evenodd'%20style='fill:%23003686'%20opacity='1'%20d='M379.519,227.698l4.237,4.101l-38.576,198.188h98.804l3.966,3.839l-7.614,38.817h-147.091l-4.064,-3.934l46.975,-241.011zM900.883,363.706c-21,-8.75%20-34.89067,-17.22667%20-41.672,-25.43c-6.78133,-8.20333%20-10.172,-19.19533%20-10.172,-32.976c0,-24.06267%208.832,-43.75033%2026.496,-59.063c17.664,-15.312%2040.55067,-22.968%2068.66,-22.968c11.266,0%2022.231,1.121%2032.895,3.363c10.664,2.242%2020.974,5.60533%2030.93,10.09l-8.139,40.672l-5.05,2.827c-6.54467,-5.18467%20-13.96233,-9.21167%20-22.253,-12.081c-9.95333,-3.44533%20-21.00033,-5.168%20-33.141,-5.168c-12.906,0%20-23.406,3.08967%20-31.5,9.269c-8.09333,6.18%20-12.14,14.08233%20-12.14,23.707c0,9.18733%2010.06233,18.32%2030.187,27.398l1.149,0.493l19.031,8.367c15.96867,7.10933%2027.64433,15.668%2035.027,25.676c7.38267,10.00733%2011.074,22.28467%2011.074,36.832c0,25.156%20-8.80467,45.226%20-26.414,60.21c-17.60933,14.98467%20-41.39833,22.477%20-71.367,22.477c-12.03133,0%20-24.30867,-1.422%20-36.832,-4.266c-12.52333,-2.84333%20-25.56633,-7.16367%20-39.129,-12.961l8.62,-44.559l4.63,-2.592c9.52333,7.45333%2019.435,13.24467%2029.735,17.374c11.59333,4.64867%2023.24167,6.973%2034.945,6.973c14.54667,0%2025.97633,-3.19933%2034.289,-9.598c8.31267,-6.39867%2012.469,-15.06667%2012.469,-26.004c0,-6.78133%20-1.914,-12.66%20-5.742,-17.636c-3.82867,-4.97667%20-9.51633,-9.051%20-17.063,-12.223zM54.3672,227.698h68.9058c25.81267,0%2045.473,5.004%2058.981,15.012c13.50733,10.008%2020.261,24.58233%2020.261,43.723c0,12.46867%20-1.996,24.82767%20-5.988,37.077c-3.992,12.25%20-9.16,21.98467%20-15.504,29.204c-8.53133,9.95267%20-19.14067,17.14433%20-31.828,21.575c-12.68733,4.42867%20-29.14817,6.643%20-49.3825,6.643h-26.9063l-17.8828,91.711h-43.7778l-3.88732,-3.761zM642.062,227.698h59.063l18.238,240.969l-4.109,3.976h-43.66l-2.297,-60.539h-0.041l-1.756,-40.844l-0.04,-0.002l-3.249,-98.607l-41.151,94.615l-0.06,-0.006l-20.5,47.5h0.005l-25.411,57.883h-43.849l-3.589,-3.474zM94.7266,268.386l-13.7813,71.859h23.4607c15.96867,0%2027.918,-3.69133%2035.848,-11.074c7.92933,-7.38267%2011.894,-18.457%2011.894,-33.223c0,-9.95333%20-2.84367,-17.03533%20-8.531,-21.246c-5.68733,-4.21067%20-15.367,-6.316%20-29.039,-6.316z'%3e%3c/path%3e%3c/svg%3e)
PBT ST820 NC010 DUPONT USA
133
Form：Granules | Grade：Toughened grade
Properties:
High impact resistance
Typical Applications:
Electronic and electrical components
Product Description
Certificates(1)
Datasheet
Product Description
| Typical Applications: | Electronic and electrical components |
| Properties: | High impact resistance |
Certificates
Technical Data Sheet
| other | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| characteristic | 无筋.超级坚固.注射成型 | |||
| Other performance | Test Condition | Test Method | Test Result | Test Unit |
| Extreme Oxygen Index | ASTM D2863 | 22 | % | |
| impact performance | Test Condition | Test Method | Test Result | Test Unit |
| Impact strength of simply supported beam without notch | -30°C | ISO 179/1eU | NoBreak | |
| 23°C | ISO 179/1eU | NoBreak | ||
| Suspended wall beam without notch impact strength | -40°C | ISO 180/1U | 270 | kJ/m² |
| -30°C | ISO 180/1U | NoBreak | ||
| 23°C | ISO 180/1U | NoBreak | ||
| flammability | Test Condition | Test Method | Test Result | Test Unit |
| Burning rate | 1.00mm | ISO 3795 | 38 | mm/min |
| UL flame retardant rating | 0.8mm | UL 94 | HB | |
| 0.8mm | IEC 60695-11-10,-20 | HB | ||
| Extreme Oxygen Index | ISO 4589-2 | 19 | % | |
| FMVSS flammability | FMVSS302 | B | ||
| Fogging-G-value | condensate | ISO 6452 | 1E-04 | g |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Elongation at Break | ASTM D638/ISO 527 | 150 | % | |
| Tensile modulus | ASTM D638/ISO 527 | 1700 | kg/cm²(MPa)[Lb/in²] | |
| Bending modulus | ASTM D790/ISO 178 | 1550 | kg/cm²(MPa)[Lb/in²] | |
| bending strength | ASTM D790/ISO 178 | 50 | kg/cm²(MPa)[Lb/in²] | |
| Tensile modulus | ISO 527-2 | 1700 | Mpa | |
| tensile strength | Yield | ISO 527-2 | 38.0 | Mpa |
| Tensile strain | Yield | ISO 527-2 | 7.0 | % |
| Nominal tensile fracture strain | ISO 527-2 | >50 | % | |
| Bending modulus | ISO 178 | 1550 | Mpa | |
| bending strength | ISO 178 | 50.0 | Mpa | |
| compressive strength | 23℃ | ASTM D695 | 43 | MPa |
| tensile strength | 23℃ | ASTM D638 | 37 | MPa |
| Tensile modulus | 23℃ | ASTM D638 | 1600 | MPa |
| Bending modulus | 23℃ | ASTM D790 | 1680 | MPa |
| bending strength | 23℃ | ASTM D638 | 53 | MPa |
| Elongation at Break | 23℃ | ASTM D638 | 150 | % |
| Impact strength of cantilever beam gap | ASTM D256 | 117 | J/m | |
| -40℃ | ASTM D256 | 117 | J/m | |
| 23℃ | ASTM D256 | No Break | J/m | |
| Suspended wall beam without notch impact strength | -40℃ | ASTM D256 | No Break | J/m |
| 23℃ | ASTM D256 | No Break | J/m | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Combustibility (rate) | UL 94 | HB(0.8mm) | ||
| Hot deformation temperature | HDT | ASTM D648/ISO 75 | 100 | ℃（℉） |
| HDT | ASTM D648/ISO 75 | 145 | ℃（℉） | |
| Melting temperature | 225 | ℃（℉） | ||
| Vicat softening temperature | ASTM D1525/ISO R306 | 216 | ℃（℉） | |
| Hot deformation temperature | 0.45MPa,Unannealed | ISO 75-2/B | 100 | °C |
| 0.45MPa,Annealed | ISO 75-2/B | 145 | °C | |
| 1.8MPa,Unannealed | ISO 75-2/A | 50.0 | °C | |
| Vicat softening temperature | ISO 306/B50 | 125 | °C | |
| Melting temperature | ISO 11357-3 | 225 | °C | |
| Linear coefficient of thermal expansion | MD | ISO 11359-2 | 1.9E-04 | cm/cm/°C |
| TD | ISO 11359-2 | 1.9E-04 | cm/cm/°C | |
| Melting temperature | ℃ | 225 | 225 | |
| Hot deformation temperature | 264 psi，Unannealed | ASTM D648 | 47 | ℃ |
| Linear coefficient of thermal expansion | 平行Flow | ASTM E831 | 0.00019 | cm/cm/℃ |
| 垂直Flow | ASTM E831 | 0.00019 | cm/cm/℃ | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| density | ASTM D792/ISO 1183 | 1220 | ||
| Shrinkage rate | ASTM D955 | 1.8 | % | |
| Water absorption rate | ASTM D570/ISO 62 | 0.12 | % | |
| Shrinkage rate | TD | ISO 294-4 | 1.8 | % |
| MD2 | ISO 294-4 | 2.5 | % | |
| MediumDensity | 1.03 | g/cm³ | ||
| Top out temperature | 170 | °C | ||
| SpecificHeatCapacity of Melt | 2100 | J/kg/°C | ||
| ThermalConductivityofMelt | 0.20 | W/m/K | ||
| Shrinkage rate | MD | ISO 294-4 | 1.9 | % |
| Water absorption rate | Saturation,23°C,2.00mm | ISO 62 | 0.31 | % |
| Equilibrium,23°C,2.00mm,50%RH | ISO 62 | 0.12 | % | |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Surface resistivity | ASTM D257/IEC 60093 | 1.00E+15 | Ω | |
| Volume resistivity | ASTM D257/IEC 60093 | >1E13 | Ω.cm | |
| Dielectric strength | IEC 60243-1 | 27 | KV/mm | |
| Dissipation factor | 100Hz | IEC 60250 | 0.020 | |
| 1MHz | IEC 60250 | 0.019 | ||
| Compared to the anti leakage trace index | IEC 60112 | PLC 0 | ||
| Surface resistivity | IEC 60093 | 1E+15 | ohms | |
| Volume resistivity | IEC 60093 | >1.0E+15 | ohms·cm | |
| hardness | Test Condition | Test Method | Test Result | Test Unit |
| Rockwell hardness | R-Scale | ISO 2039-2 | 104 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.