LDPE F108-5 TPC SINGAPORE

Form：Granules | Grade：Thin film grade

Properties:

High shrinkageHigh toughness

Typical Applications:

film

Supplier(0)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	film
Properties:	High shrinkage \| High toughness

Certificates

No Data...

Technical Data Sheet

optical performance	Test Condition	Test Method	Test Result	Test Unit
gloss	30.0μm	ASTM D2457	100
turbidity	30.0μm	ASTM D1003	7.0	%
other	Test Condition	Test Method	Test Result	Test Unit
characteristic			薄膜级
Other performance	Test Condition	Test Method	Test Result	Test Unit
rigidity		ASTM D-747	2100	kg/cm
rigidity	rigidity		ASTM D-747	2100	°C
Basic Performance	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate		ASTM D-1238	0.4	g/10min
density		ASTM D-792	0.921
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength	Break	ASTM D638	19.6	Mpa
elongation	Break	ASTM D638	700	%
Bending modulus		ASTM D747	210	Mpa
tensile strength	Break	ASTM D-638	200	kg/cm
elongation		ASTM D-638	700	%
Elongation at Break		ASTM D638/ISO 527	700	%
tensile strength		ASTM D638/ISO 527	19.6	kg/cm²(MPa)[Lb/in²]
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Melting temperature		Internal Method	109	°C
Melting temperature	Melting temperature			109	℃（℉）
Physical properties	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate		ASTM D1238	0.40	g/10min
density		ASTM D792/ISO 1183	0.921
melt mass-flow rate		ASTM D1238/ISO 1133	0.4	g/10min
film	Test Condition	Test Method	Test Result	Test Unit
film thickness			30	µm
Supplementary Information	Test Condition	Test Method	Test Result	Test Unit
viscosity	30.0μm	ASTM D3354	20.0	g/100cm²
Content of lubricant	30.0μm	Internal Method	0.900	Tanθ

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top