PP PolyFibra® PF-PEJ01
0
- Properties:Fillerwood fiber
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO1183 | 1.01 g/cm³ | |
| melt mass-flow rate | ISO1133 | 0.70 g/10min | |
| density | ISO1183 | 1.01 g/cm³ | |
| melt mass-flow rate | ISO1133 | 0.70 g/10min |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ISO868 | 74 | ||
| ISO868 | 74 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile strain | Yield | ISO527-2 | 2.9 % |
| Break | ISO527-2 | 3.0 % | |
| Flexural modulus | ISO178 | 4620 MPa | |
| Tensile modulus | ISO527-2 | 3410 MPa | |
| Tensile stress | Yield | ISO527-2 | 46.2 MPa |
| Break | ISO527-2 | 45.9 MPa | |
| Tensile strain | Yield | ISO527-2 | 2.9 % |
| Break | ISO527-2 | 3.0 % | |
| Flexural modulus | ISO178 | 4620 MPa | |
| Tensile modulus | ISO527-2 | 3410 MPa | |
| Tensile stress | Yield | ISO527-2 | 46.2 MPa |
| Break | ISO527-2 | 45.9 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of simply supported beam without notch | ISO179 | 14 kJ/m² | |
| ISO179 | 14 kJ/m² |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top