PPS TS201HS TOYOBO JAPAN

Form：Granules | Grade：Injection grade

Properties:

dimensional stability High rigidityFiller: Glass mineral

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Properties:

dimensional stability | High rigidity | Filler: Glass mineral

Certificates

No Data...

Technical Data Sheet

other	Test Condition	Test Method	Test Result	Test Unit
characteristic			玻璃纤维和无机物填充增强等级.与40%玻璃纤维增强等级一样的性能
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating		UL 94	V-0
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Bending modulus		ASTM D790/ISO 178	21*10^4	kg/cm²(MPa)[Lb/in²]
bending strength		ASTM D790/ISO 178	2650	kg/cm²(MPa)[Lb/in²]
tensile strength		ASTM D638/ISO 527	2010	kg/cm²(MPa)[Lb/in²]
Tensile modulus		ASTM D638/ISO 527	23*10^4	kg/cm²(MPa)[Lb/in²]
bending strength	Yield	ASTM D790	234	Mpa
Bending modulus		ASTM D790	18600	Mpa
elongation	Break	ASTM D638	1.4	%
tensile strength	Yield	ASTM D638	170	Mpa
Tensile modulus		ASTM D638	21600	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Linear coefficient of thermal expansion	TD	ASTM D696	4.8E-05	cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	MD	ASTM D696	1.2E-05	cm/cm/°C
Hot deformation temperature	1.8MPa,Unannealed	ASTM D648	260	°C
Hot deformation temperature	Hot deformation temperature	HDT	ASTM D648/ISO 75	>260	℃（℉）
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	24hr	ASTM D570	0.020	%
Shrinkage rate	TD	ASTM D955	0.45	%
Shrinkage rate	Shrinkage rate	MD	ASTM D955	0.15	%
density		ASTM D792/ISO 1183	1.96
Water absorption rate		ASTM D570/ISO 62	0.02	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Arc resistance		ISO 14782	173
Dissipation factor	1MHz	ASTM D150	8.5E-03
Dissipation factor	Dissipation factor	1kHz	ASTM D150	0.055
Dielectric constant	1MHz	ASTM D150	4.50
Dielectric constant	Dielectric constant	1kHz	ASTM D150	5.10
Dielectric strength		ASTM D149	11	KV/mm
Volume resistivity		ASTM D257	1E+15	ohms·cm
Compared to the anti leakage trace index		IEC 60112	PLC 3
Arc resistance		ASTM D495	137	sec
hardness	Test Condition	Test Method	Test Result	Test Unit
Rockwell hardness	R-Scale	ASTM D785	121

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top