Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ISO1183 | 1.24到1.30 g/cm³ |
| melt mass-flow rate | | ISO1133 | 3.0到18 g/10min |
| Shrinkage rate | | | 0.35到0.55 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| | ISO868 | 65到70 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | V-0 |
| Hot filament ignition temperature | | VDE0471/2 | 960 °C |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile strain | Break | ISO527-2 | >4.0 % |
| Tensile modulus | | ISO527-2 | 4000到7500 MPa |
| Tensile stress | Yield | ISO527-2 | 50.0到80.0 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ISO180/1A | >8.0 kJ/m² |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ISO75-2/A | 110 °C |
| vicat | | ISO306/B | 110 °C |
| | ISO3146 | 160 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare