PC S-2000R MITSUBISHI THAILAND

Form：Granules | Grade：Injection grade

Properties:

Medium viscosityheat-resistingMedium viscosityFlame retardantDemolding ability

Typical Applications:

Electronic and electrical componentsAutomotive Applications

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Electronic and electrical components \| Automotive Applications
Properties:	Medium viscosity \| heat-resisting \| Medium viscosity \| Flame retardant \| Demolding ability

Certificates

No Data...

Technical Data Sheet

mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength		ASTM D 638	58.8-68.6	Mpa
Stretching length		ASTM D638	90-140	%
bending strength		ASTM D790	80.4-90.2	Mpa
Bending modulus		ASTM D790	2.3	GPa
Impact strength of cantilever beam gap		ASTM D256	740-1000	J/m
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	4.6kgf/cm	ASTM D 648	136-142	°C
Hot deformation temperature	Hot deformation temperature	18.6kgf/cm	ASTM D 648	130-136	°C
Linear coefficient of thermal expansion			6-7	10
Combustibility		UL 94	V-2
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Rockwell hardness		ASTM D785	123	R
Shrinkage rate	Flow		0.5-0.8	%
Shrinkage rate	Shrinkage rate	Across Flow		0.5-0.8	%
density		ASTM D792	1.2
Water absorption rate	23℃,24hrs	ASTM D570	0.23-0.26	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dielectric constant	10	ASTM D150	25.2	Pf/m
Dielectric loss	10，Tangent	ASTM D150	0.0082
Dielectric strength		ASTM D149	18-22	KV/mm

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top