Epoxy 360 Epoxy Technology Inc.

Typical Applications:

Immersion applications medical nursing supplies electrical electronic applications adhesives

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:

Certificates

No Data...

Technical Data Sheet

Cured Properties	Test Condition	Test Method	Test Result	Test Unit
Shore hardness	ShoreD		87
LapShearStrength	23°C		>13.8	MPa
Relative permittivity	1kHz		3.74
Volume resistivity	23°C		>2.0E+13	ohms·cm
Dissipation factor	1kHz		0.011
Uncured Properties	Test Condition	Test Method	Test Result	Test Unit
density	Pot Life		360	min
	density	固化时间(150°C)		1.0	hr
		density	粘度8(23°C)		0.35to0.55	Pa·s
			density	PartA		1.15	g/cm³
			density	density	PartB		1.02	g/cm³
Color	--7		Clear/Transparent
Color	Color	--6		Amber
optical performance	Test Condition	Test Method	Test Result	Test Unit
transmissivity	500nm		>51.0	%
Refractive index			1.535
transmissivity	700to1600nm		>97.0	%
transmissivity	transmissivity	600nm		>88.0	%
thermosetting	Test Condition	Test Method	Test Result	Test Unit
Thermosetting components	PartB		按重量计算的混合比:10
	Thermosetting components	按重量计算的混合比		100
	Thermosetting components	Thermosetting components	Shelf Life(23°C)		52	wk
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Linear coefficient of thermal expansion	MD：--4		1.8E-04	cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	MD：--3		3.9E-05	cm/cm/°C
Glass transition temperature			>90.0	°C
Supplementary Information	Test Condition	Test Method	Test Result	Test Unit
Shear Strength	23°C		23.4	MPa
DegradationTemperature		TGA	375	°C
operate temperature	Continuous		-55-200	°C
weight loss on heating	300°C		1.1	%
	weight loss on heating	250°C		0.25	%
	weight loss on heating	weight loss on heating	200°C		0.080	%
operate temperature	StorageModulus(23°C)		2.22	GPa
operate temperature	operate temperature	Intermittent		-55-300	°C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top