Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTMD792 | 1.27 g/cm³ |
| Water absorption rate | | ASTMD570 | 0.25 % |
| optical performance | Test Condition | Test Method | Test Result |
|---|
| refractive index | | | 1.658 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | VTM-0 |
| Limiting Oxygen Index | | ASTMD2863 | 27 % |
| NBSSmokeDensity | | ASTME662 | 6.00 |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| Tear strength - pro | | ASTMD1004 | 147.1 kN/m |
| film | Test Condition | Test Method | Test Result |
|---|
| Elastic modulus MD | | ASTMD882 | 3280 MPa |
| tensile strength | Yield | ASTMD882 | 97.9 MPa |
| elongation | Break | ASTMD882 | 52 % |
| | ASTMD790 | 3310 MPa |
| oxygen permeability | | | 9.8 cm³·mm/m²/atm/24hr |
| Water vapor permeability | | | 2.3 g·mm/m²/atm/24hr |
| CarbonDioxidePermeability | | | 67 cm³·mm/m²/atm/24hr |
| Area coefficient | | | 21900 in²/lb/mil |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Surface Resistivity | | ASTMD257 | >1.0E+16 ohms |
| dielectric strength | | ASTMD149 | 120 kV/mm |
| dielectric constant | | ASTMD150 | 3.15 |
| Dissipation Factor | | ASTMD150 | 1.3E-03 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Continuous use temperature | | | 170 °C |
| Glass Transition Temperature | | ASTMD3418 | 216 °C |
| | ASTMD648 | 201 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare