
LDPE LD100 Yanshan Petrochemical
Typical Applications:
Usage: Used for agricultural film shrink film transparent film laminated film shopping bags frozen film medical packaging co extruded multi-layer film various packaging bags LLDPE blends injection molding power cable insulation silane crosslinking peroxide crosslinking
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Usage: Used for agricultural film | shrink film | transparent film | laminated film | shopping bags | frozen film | medical packaging | co extruded multi-layer film | various packaging bags | LLDPE blends | injection molding | power cable insulation | silane crosslinking | peroxide crosslinking |
Certificates
No Data...
Technical Data Sheet
| Basic Performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| density | 0.9205~0.9245 | |||
| melt mass-flow rate | 1.7~2.3 | g/10min | ||
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| tensile strength | TD,Break | ≥17 | MPa | |
| Elongation at Break | MD | ≥200 | % | |
| elongation | Break | ≥500 | % | |
| Elongation at Break | TD | ≥450 | % | |
| tear strength | MD (Across Flow) | ≥4.0 | CN/μm | |
| Shore hardness | ≥44 | |||
| Impact strength of cantilever beam gap | ≥2.0 | CN/μm | ||
| tensile strength | MD,Break | ≥18 | MPa | |
| tear strength | TD (Across Flow) | ≥3.0 | ||
| tensile strength | Break | ≥9 | MPa | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Melting temperature | 106~111 | ℃ | ||
| Vicat softening temperature | ≥90 | ℃ | ||
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| film thickness | 30 | μm | ||
| turbidity | ≤8 | ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.