Share
Add to Compare

ABS 4H33100 4Plas

Properties:
High gloss good fluidity flame retardant performance
Product Description
Certificates(0)
Datasheet

Product Description

Properties:High gloss | good fluidity | flame retardant performance

Certificates

No Data...

Technical Data Sheet

mechanical propertiesTest ConditionTest MethodTest ResultTest Unit
Tensile strain23℃,BreakISO 527-25.0%
Tensile stress23℃ISO 527-240.0MPa
Impact strength of cantilever beam gap23℃ASTM D-256100J/m
Bending modulus23℃ISO 1782300MPa
thermal performanceTest ConditionTest MethodTest ResultTest Unit
Hot filament ignition temperature2.00mmIEC 60695-2-13960
UL flame retardant rating1.60mmV-0
Ball Pressure Test75℃IEC 60335-1Pass
Vicat softening temperatureISO 306/B85.0
Hot deformation temperature1.8 MPa, UnannealedISO 75-2/A75.0
Physical propertiesTest ConditionTest MethodTest ResultTest Unit
Shrinkage rateMDISO 25570.40-0.60%
Water absorption rateSaturation,23℃ISO 620.15%
melt mass-flow rateISO 113330g/10min
densityISO 11831.18g/cm3
Electrical performanceTest ConditionTest MethodTest ResultTest Unit
Compared to the anti leakage trace indexIEC 60112PLC 0
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.