PA6 NYLAFORCE® B 60
0
- Properties:Fillerglass fiber reinforced material60%filler by weight
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | g/cm³ | 1.70 -- | |
| Shrinkage rate | % | 0.10to0.40 -- |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | MPa | 21000 -- | |
| MPa | 14000 -- | ||
| MPa | 9800 -- | ||
| MPa | 9600 -- | ||
| tensile strength | MPa | 265 -- | |
| Tensile strain | % | 2.9 -- | |
| % | 4.5 -- | ||
| % | 6.4 -- | ||
| % | 5.4 -- | ||
| tensile strength | MPa | 110 -- | |
| MPa | 145 -- | ||
| MPa | 185 -- |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Charpy Notched Impact Strength | kJ/m² | 19 -- | |
| kJ/m² | 29 -- | ||
| Impact strength of simply supported beam without notch | kJ/m² | 95 -- | |
| 无断裂 -- |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | °C | >200 -- | |
| melting temperature | °C | 221 -- |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top