PA46 TW271F6 DSM HOLAND

Form：Granules | Grade：Injection grade

Properties:

Thermal stabilityLubricity

Typical Applications:

CastersAutomotive Applications

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Casters \| Automotive Applications
Properties:	Thermal stability \| Lubricity

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Charpy Notched Impact Strength	-30°C	ISO 179/1eA	11	kJ/m²
Charpy Notched Impact Strength	Charpy Notched Impact Strength	23°C	ISO 179/1eA	13	kJ/m²
Impact strength of simply supported beam without notch	-30°C	ISO 179/1eU	65	kJ/m²
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	85	kJ/m²
Impact strength of cantilever beam gap	-40°C	ISO 180/1A	11	kJ/m²
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	23°C	ISO 180/1A	13	kJ/m²
flammability	Test Condition	Test Method	Test Result	Test Unit
Flammability level		UL 94	HB
Flammability level	Flammability level		UL 94	HB
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus	--	ISO 527-2	10000	Mpa
	Tensile modulus	120°C	ISO 527-2	5250	Mpa
		Tensile modulus	160°C	ISO 527-2	4750	Mpa
			Tensile modulus	180°C	ISO 527-2	4500	Mpa
			Tensile modulus	Tensile modulus	200°C	ISO 527-2	4250	Mpa
tensile strength	Break	ISO 527-2	190	Mpa
	tensile strength	Break, 120°C	ISO 527-2	100	Mpa
		tensile strength	Break, 160°C	ISO 527-2	85.0	Mpa
			tensile strength	Break, 180°C	ISO 527-2	80.0	Mpa
			tensile strength	tensile strength	Break, 200°C	ISO 527-2	75.0	Mpa
Tensile strain	Break	ISO 527-2	3.5	%
	Tensile strain	Break, 120°C	ISO 527-2	6.5	%
		Tensile strain	Break, 160°C	ISO 527-2	6.5	%
			Tensile strain	Break, 180°C	ISO 527-2	6.5	%
			Tensile strain	Tensile strain	Break, 200°C	ISO 527-2	6.5	%
Bending modulus		ISO 178	8500	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	0.45 MPa, Unannealed	ISO 75-2/B	290	°C
Hot deformation temperature	Hot deformation temperature	1.8 MPa, Unannealed	ISO 75-2/A	290	°C
Melting temperature		ISO 11357-3	295	°C
Linear coefficient of thermal expansion	Flow	ISO 11359-2	2.5E-5	cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	Across Flow	ISO 11359-2	6.0E-5	cm/cm/°C
Thermal Index - 5000 hr		IEC 60216	177	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ISO 1183	1.54	g/cm³
Shrinkage rate	横向Flow	ISO 294-4	1.3	%
Shrinkage rate	Shrinkage rate	Flow	ISO 294-4	0.50	%
Water absorption rate	Equilibrium, 23°C, 50% RH	ISO 62	2.0	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Volume resistivity		IEC 60093	1.0E+14	ohms·cm
Compared to the anti leakage trace index		IEC 60112	PLC 1

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top