LDPE

LDPE 2420K CNOOC Shell

Properties:
Low density polyethylene granular with good processing performance good sealing performance and good optical properties
Usages:
Blown film and cast film shrink film hygiene packaging film cling film heat sealing layer injection molded products
Compare

Technical Data Sheet

Other performance	Test Condition	Test Method	Test Result
Ball Pressure Test	H49/30	ISO 2039-1	18 MPa
gloss	60°	ASTM D-2457	105
turbidity	70μm	ASTM D-1003	<7 %
gloss	20°	ASTM D-2457	＞60
Shore hardness		ISO 868	48
Elastic modulus		ISO 527	260 MPa
Piercing energy		DIN 53373	3.5 J/MM
Friction coefficient		ISO 1003	60 %

Basic Performance	Test Condition	Test Method	Test Result
melt mass-flow rate	190℃/2.16kg	ISO 1133	4 g/10min
density	23℃	ISO 1183	0.924 g/cm3

mechanical properties	Test Condition	Test Method	Test Result
tensile strength	Across Flow	ISO 527	22 MPa
	tensile strength	Across Flow	ISO 527	15 MPa
		tensile strength	Yield	ISO 527	11 MPa
			tensile strength	Across Flow	ISO 527	22 MPa
			tensile strength	tensile strength	Across Flow	ISO 527	15 MPa
Elongation at Break	Across Flow	ISO 527	300 %
Elongation at Break	Elongation at Break	Across Flow	ISO 527	600 %

thermal performance	Test Condition	Test Method	Test Result
Vicat softening temperature	A/50	ISO 306	92 ℃
Melting temperature		ISO 3146	111 ℃

Physical properties	Test Condition	Test Method	Test Result
Impact strength of cantilever beam gap		ASTM D-1709	100 g

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top