TPEE 1163LL NANTONG CHANGCHUN

Form：Granules | Grade：Injection grade

Properties:

Aging resistanceHigh temperature resistanUV resistanceHigh elastic modulus

Typical Applications:

Wear resistant accessoriesElectrical packaging adhesiveWire and cableIndustrial machineryFitness equipment

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Wear resistant accessories \| Electrical packaging adhesive \| Wire and cable \| Industrial machinery \| Fitness equipment
Properties:	Aging resistance \| High temperature resistan \| UV resistance \| High elastic modulus

Certificates

No Data...

Technical Data Sheet

Other performance	Test Condition	Test Method	Test Result	Test Unit
tensile strength		ISO 527	36	Mpa
Basic Performance	Test Condition	Test Method	Test Result	Test Unit
Shore hardness	Shore D	ISO 868	63
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Dielectric strength		IEC 60243	17	KV/mm
Volume resistivity		IEC 60093	3.0E 13	Ohm
Volume resistivity	Volume resistivity		IEC 60093	7.0E 13	Ohm cm
Impact strength of cantilever beam gap		ISO 179/IeA	PARTIAL BREAK	kJ/㎡
Flexural elasticity		ISO 178	300	Mpa
Elongation at Break		ISO 527	460	%
tensile strength		ISO 527	36	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate	2.16kg at 230℃	ISO 1133	8	g/10 min
Melting temperature		ISO 3146C	211	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate		ISO 294-4	1.7	%
Water absorption rate	24hr	ISO 62	0.5	%

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top