
PC PC-1220 LOTTE KOREA
208
Form:Granules | Grade:Injection grade
Properties:
transparentHigh rigidity
Typical Applications:
Optical levelcurrency
Product Description
Certificates(1)
Datasheet
Product Description
| Typical Applications: | Optical level | currency |
| Properties: | transparent | High rigidity |
Certificates
TDS
Technical Data Sheet
| optical performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Refractive index | ASTM D542 | 1.585 | ||
| turbidity | ASTM D1003 | <0.8 | % | |
| Transmittance rate | ASTM D1003 | 89 | % | |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Impact strength of cantilever beam gap | ASTM D256 | 80 | kg.cm/cm | |
| Rockwell hardness | ASTM D785 | 77 | M | |
| Bending modulus | ASTM D790 | 24000 | kg/cm | |
| bending strength | ASTM D790 | 920 | kg/cm | |
| elongation | ASTM D638 | 60 | % | |
| tensile strength | ASTM D638 | 630 | kg/cm | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Vicat softening temperature | ASTM D1525 | 153 | °C | |
| Linear coefficient of thermal expansion | ASTM D696 | 6-8 | ||
| Hot deformation temperature | 1.8Mpa | ASTM D648 | 125 | °C |
| 0.45Mpa | ASTM D648 | 136 | °C | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Water absorption rate | ASTM D570 | 0.2 | % | |
| Shrinkage rate | ASTM D955 | 0.5-0.7 | % | |
| melt mass-flow rate | ASTM D1238 | 22 | g/10min | |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Dissipation factor | ASTM D150 | 2.95 | ||
| Volume resistivity | 10 | ASTM D257 | 3 | Ω.cm |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.