Phenolic Resiten® C Iten Industries

Product Description

Certificates(0)

Datasheet

Product Description

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap	Flow:12.7mm	ASTM D256	130	J/m
	Impact strength of cantilever beam gap	横向Flow:1.57mm	ASTM D256	94	J/m
		Impact strength of cantilever beam gap	横向Flow:3.18mm	ASTM D256	90	J/m
			Impact strength of cantilever beam gap	横向Flow:12.7mm	ASTM D256	69	J/m
				Impact strength of cantilever beam gap	Flow:1.57mm	ASTM D256	150	J/m
				Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	Flow:3.18mm	ASTM D256	140	J/m
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	12.7mm	UL 94	HB
	UL flame retardant rating	3.2mm	UL 94	HB
	UL flame retardant rating	UL flame retardant rating	1.6mm	UL 94	HB
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
bending strength	12.7mm3	ASTM D790	138	MPa
	bending strength	3.18mm4	ASTM D790	105	MPa
	bending strength	bending strength	3.18mm3	ASTM D790	146	MPa
tensile strength	Flow:1.57mm	ASTM D638	79.3	MPa
	tensile strength	横向Flow:1.57mm	ASTM D638	44.8	MPa
		tensile strength	Flow:3.18mm	ASTM D638	85.5	MPa
		tensile strength	tensile strength	横向Flow:3.18mm	ASTM D638	52.4	MPa
bending strength	1.57mm3	ASTM D790	169	MPa
	bending strength	1.57mm4	ASTM D790	114	MPa
	bending strength	bending strength	12.7mm4	ASTM D790	93.8	MPa
compressive strength	1.57mm5	ASTM D695	46.4	MPa
	compressive strength	1.57mm6	ASTM D695	45.7	MPa
		compressive strength	1.57mm7	ASTM D695	>310	MPa
			compressive strength	3.18mm5	ASTM D695	153	MPa
				compressive strength	3.18mm6	ASTM D695	143	MPa
					compressive strength	3.18mm7	ASTM D695	>310	MPa
						compressive strength	12.7mm5	ASTM D695	213	MPa
							compressive strength	12.7mm6	ASTM D695	194	MPa
							compressive strength	compressive strength	12.7mm7	ASTM D695	>310	MPa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
RTI	1.6mm	UL 746	125	°C
RTI Elec	1.6mm	UL 746	115	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ASTM D792	1.36	g/cm³
Water absorption rate	24hr,1.57mm	ASTM D570	1.4	%
	Water absorption rate	24hr,3.18mm	ASTM D570	0.98	%
	Water absorption rate	Water absorption rate	24hr,12.7mm	ASTM D570	0.52	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dielectric strength	1.27cm	ASTM D149	33000	V
	Dielectric strength	3.18mm	ASTM D149	43000	V
	Dielectric strength	Dielectric strength	1.57mm	ASTM D149	50000	V
Hot wire ignition	1.45mm	UL 746	PLC 4	sec
Arc resistance	12.7mm	ASTM D495	47.0	sec
	Arc resistance	3.18mm	ASTM D495	38.0	sec
	Arc resistance	Arc resistance	1.57mm	ASTM D495	47.0	sec
Dissipation factor	3.18mm,1MHz	ASTM D150	0.064
Dielectric constant	3.18mm,1MHz	ASTM D150	5.32
	Dielectric constant	3.18mm,1kHz	ASTM D150	8.27
		Dielectric constant	1.57mm,1MHz	ASTM D150	4.59
		Dielectric constant	Dielectric constant	1.57mm,1kHz	ASTM D150	6.71
Dielectric strength	3.18mm	ASTM D149	9.0	kV/mm
Dielectric strength	Dielectric strength	1.57mm	ASTM D149	15	kV/mm
Dissipation factor	1.57mm,1kHz	ASTM D150	0.17
	Dissipation factor	1.57mm,1MHz	ASTM D150	0.053
	Dissipation factor	Dissipation factor	3.18mm,1kHz	ASTM D150	0.22
Supplementary Information	Test Condition	Test Method	Test Result	Test Unit
viscosity	1.27cm	ASTM D229	1E+06	g

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top