HIPS HP-707
0
- Properties:Extremely high impact resistanceexcellent heat resistance
- Usages:Suitable for injection molding or vacuum extrusion moldingradio or television casingrefrigerator interiorfood packaging
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shrinkage rate | ASTM D-955 | 0.005 cm/cm | |
| density | ASTM D-792 | 1.05 |
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Water absorption rate | ASTM D-570 | 0.06 % | |
| melt mass-flow rate | ASTM D-1238 | 3 g/10min |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shore hardness | ASTM D-785 | 1.68 L,M-Scale | |
| Impact strength of cantilever beam gap | ASTM D-256 | 11.5 kg.cm/cm | |
| Flexural modulus | ASTM D-790 | 2.0×10 Kg/cm | |
| bending strength | ASTM D-790 | 420 Kg/cm | |
| elongation | ASTM D-638 | 42 % | |
| tensile strength | ASTM D-638 | 250 Kg/cm |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Diefectic constant | ASTM D-150 | 2.6 | |
| Dissipation Factor | ASTM D-150 | 0.0005 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | Unannealed | ASTM D-648 | 90 ℃ |
| UL flame retardant rating | UL 94 | HB | |
| vicat | ASTM D-1525 | 100 ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top