PC CARBO TEX K-20 KOTEC JAPAN

Certificates:
UL
Compare

Technical Data Sheet

mechanical properties	Test Condition	Test Method	Test Result
Impact strength of cantilever beam gap	-	ASTM D256	740 J/m
	Impact strength of cantilever beam gap	-	ASTM D256	75 Kgf.cm/cm
	Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	-	ASTM D256	14 ft.ibf/in
tensile strength	-	ASTM D638	63 Mpa
	tensile strength	-	ASTM D638	640 Kgf/cm
	tensile strength	tensile strength	-	ASTM D638	9100 Ibf/in
elongation	Break	ASTM D638	120 %
bending strength	-	ASTM D790	85 Mpa
	bending strength	-	ASTM D790	870 Kgf/cm
	bending strength	bending strength	-	ASTM D790	12400 Ibf/in
Bending modulus	-	ASTM D790	2160 Mpa
	Bending modulus	-	ASTM D790	22000 Kgf/cm
	Bending modulus	Bending modulus	-	ASTM D790	313000 Ibf/in
Elongation at Break		ASTM D638/ISO 527	120 %
tensile strength		ASTM D638/ISO 527	63(MPa) kg/cm²(MPa)[Lb/in²]
Bending modulus		ASTM D790/ISO 178	2160(MPa) kg/cm²(MPa)[Lb/in²]
bending strength		ASTM D790/ISO 178	85(MPa) kg/cm²(MPa)[Lb/in²]

thermal performance	Test Condition	Test Method	Test Result
melt mass-flow rate	300℃,1.2kg	ASTM D1238	20 g/10min
Hot deformation temperature	18.6kg/cm	ASTM D648	133 °C
Hot deformation temperature	Hot deformation temperature	18.6kg/cm	ASTM D648	271 ℉

Physical properties	Test Condition	Test Method	Test Result
density		ASTM D792/ISO 1183	1.20

Electrical performance	Test Condition	Test Method	Test Result
Volume resistivity		ASTM D257	10 Ω.cm

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top