HDPE LH514
0
- Usages:Used for injection moldingcasting film extrusion
CompareTechnical Data Sheet
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D-1505 | 0.956 g/cm | |
| melt mass-flow rate | ASTM D-1238 | 12 g/10min |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Torsional stiffness | ASTM D-1043 | 9600 kg/cm | |
| tensile strength | ASTM D-638 | 250 g/cm | |
| Impact strength of cantilever beam gap | ASTM D-256 | 4.0 kg-cm/cm | |
| Bending stiffness | ASTM D-747 | 8300 kg/cm | |
| Shore hardness | ASTM D-2240 | 68 | |
| tensile strength | ASTM D-638 | 180 kg/cm | |
| elongation | ASTM D-638 | 550 ％ | |
| Flexural modulus | ASTM D-638 | 7800 kg/cm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Low temperature brittleness temperature | ASTM D-746 | ＜-76 ℃ | |
| melting temperature | ASTM D-2117 | 129 ℃ | |
| vicat | ASTM D-1525 | 125 ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top