
PBT DR48 SABIC INNOVATIVE US
110
Form:Granules | Grade:Injection grade
Properties:
Flame retardantGlass fiber reinforcedCharacteristics: 17% glasUL94
Typical Applications:
Side track applicationNon specific foodLawn equipmentGarden equipmentIndustrial applicationsAutomotive External PartsElectrical fieldElectronic fieldArchitectural application fieldOutdoor applicationsElectrical appliancesEngine hood partsMedical suppliesNursing suppliesPlastic bagAutomotive interior partsCasters
Product Description
Certificates(1)
Datasheet
Product Description
| Typical Applications: | Side track application | Non specific food | Lawn equipment | Garden equipment | Industrial applications | Automotive External Parts | Electrical field | Electronic field | Architectural application field | Outdoor applications | Electrical appliances | Engine hood parts | Medical supplies | Nursing supplies | Plastic bag | Automotive interior parts | Casters |
| Properties: | Flame retardant | Glass fiber reinforced | Characteristics: 17% glas | UL94 |
Certificates

Technical Data Sheet
| Other performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| UL flame retardant rating | 0.9 | mm | ||
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Rockwell hardness | 118 | |||
| Long term use temperature | 无冲击 | 140 | °C | |
| 含冲击 | 120 | °C | ||
| 电气 | 120 | °C | ||
| Impact strength of cantilever beam gap | 23℃ | 53 | J/m | |
| tensile strength | Break | 93 | Mpa | |
| Bending modulus | 5030 | Mpa | ||
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Hot deformation temperature | HDT | 182 | °C | |
| UL flame retardant rating | 3 | mm | ||
| Linear coefficient of thermal expansion | 2E-05 | 1/℃ | ||
| Hot deformation temperature | HDT | 210 | °C | |
| UL flame retardant rating | V-0 | |||
| 5V | ||||
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Shrinkage rate | 4-6 | E-3 | ||
| Water absorption rate | 0.07 | % | ||
| density | 1.53 | |||
| enhance | 15 | % | ||
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Dissipation factor | 0.02 | |||
| Dielectric constant | 3.4 | |||
| Volume resistivity | 4E+16 | ohm-cm |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.