PA Stanyl® HFX50S DSM Additive Manufacturing

Properties:
Filler glass fiber reinforced material 30% filler by weight
Compare

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result
Impact strength of cantilever beam gap	23℃	J/m	0.013to0.050
Impact strength of simply supported beam without notch	23℃	kJ/m²	7.892to21.357
Charpy Notched Impact Strength	23℃	kJ/m²	0.789to3.762
Suspended wall beam without notch impact strength	23℃	J/m	0.085to0.462

mechanical properties	Test Condition	Test Method	Test Result
crack		%	2.0-4.6
	crack			26.0to260.0 Mpa
		crack			56.0to260.0 Mpa
		crack	crack		%	1.7-2.7
yield			27.03to260.0 Mpa
yield	yield		%	1.5-5.0

thermal performance	Test Condition	Test Method	Test Result
Melting temperature		°C	220to265
Linear coefficient of thermal expansion	MD	mm/mm/°C	30.5E-5到50.8E-5

Physical properties	Test Condition	Test Method	Test Result
Water absorption rate	23℃,24hr	%	0.15-0.53
flow		mm/mm	25.4E-3-134.6E-3

Electrical performance	Test Condition	Test Method	Test Result
Volume resistivity	23℃	ohms·cm	1.0E+4-1.0E+16
Surface resistivity		ohms	1.0E+12-1.0E+14
Dielectric strength	23℃	V/mil	490to610
Compared to the anti leakage trace index		V	PLC 0

hardness	Test Condition	Test Method	Test Result
Rockwell hardness	23℃		122to125

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top