Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTMD792 | 1.80到1.90 g/cm³ |
| Tightening rate | | ASTMD1895 | 1.0 |
| Shrinkage rate | | ASTMD955 | 0.050到0.30 % |
| Water absorption rate | | ASTMD570 | 0.17 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Barcol Hardness | | ASTMD2583 | 25到35 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | V-0 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| bending strength | | ASTMD790 | 55.2到75.8 MPa |
| Compression Modulus | | ASTMD695 | 359000到379000 MPa |
| compressive strength | | ASTMD695 | 96.5到110 MPa |
| tensile strength | | ASTMD638 | 27.6到34.5 MPa |
| Flexural modulus | | ASTMD790 | 8960到11000 MPa |
| shear strength | | ASTMD732 | 27.6到34.5 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTMD256 | 80到130 J/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| dielectric strength | | ASTMD149 | >16 kV/mm |
| arc resistance | | ASTMD495 | >240 sec |
| Inclined-PlaneTracking | | ASTMD2303 | >1000 min |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ASTMD648 | >260 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare