PC KG-20MRA KOTEC JAPAN

Form：Granules | Grade：Injection grade

Properties:

Fiber gradeGlass fiber reinforcedFiller: Glass fiber reinf20%Filler by weight

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Properties:

Fiber grade | Glass fiber reinforced | Filler: Glass fiber reinf | 20% | Filler by weight

Certificates

No Data...

Technical Data Sheet

optical performance	Test Condition	Test Method	Test Result	Test Unit
turbidity	3.00mm	ASTM D1003	Translucent
other	Test Condition	Test Method	Test Result	Test Unit
characteristic			低粘度.高流量.易脱模品级
Color			透明
purpose			注塑.薄成型.
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	3.0mm	UL 94	V-0
Basic Performance	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	23 ℃	ASTM D-570	0.11	%
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Bending modulus		ASTM D-790	98-137	J/m
Impact strength of cantilever beam gap	V-Notched，3.2mm	ASTM D-256	10-14	kJ/m²
Rockwell hardness		ASTM D-785	121
tensile strength		ASTM D-638	108	Mpa
bending strength		ASTM D-790	5680	Mpa
elongation	Break	ASTM D-638	4	%
Elongation at Break		ASTM D638/ISO 527	4.0	%
tensile strength		ASTM D638/ISO 527	640	kg/cm²(MPa)[Lb/in²]
bending strength		ASTM D790/ISO 178	85	kg/cm²(MPa)[Lb/in²]
tensile strength	Break	ASTM D638	108	Mpa
elongation	Break	ASTM D638	4.0	%
Bending modulus		ASTM D790	5690	Mpa
bending strength		ASTM D790	152	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	HDT	ASTM D-648	140-148	°C
Combustibility (rate)		UL 94	V-2/1.6mm
Hot deformation temperature	HDT	ASTM D648/ISO 75	133	℃（℉）
Hot deformation temperature	Hot deformation temperature	1.8MPa,Unannealed	ASTM D648	145	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ASTM D792/ISO 1183	1.30
melt mass-flow rate		ASTM D1238/ISO 1133	15	g/10min
Shrinkage rate	MD	ASTM D955	0.30-0.50	%
Water absorption rate	23°C,24hr	ASTM D570	<0.20	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Volume resistivity		ASTM D-25	1014	Ω.cm
Dielectric constant	10HZ	ASTM D-150	3.3
Arc resistance		ASTM D-495	110	sec
Volume resistivity		ASTM D257/IEC 60093	10^16	Ω.cm
Volume resistivity	Volume resistivity		ASTM D257	1E+16	ohms·cm
Dielectric strength	1.60mm	ASTM D149	20	KV/mm
Dielectric constant	1MHz	ASTM D150	3.20
Dissipation factor	1MHz	ASTM D150	8E-03
Arc resistance		ASTM D495	110	sec

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top