MDPE DNDD-7152

Properties:
Characteristics
good rotational molding performance
short molding cycle
high impact resistance
good resistance to environmental stress cracking
Usages:
Suitable for making various small and medium-sized toys
storage tanks
trash cans
storage tanks
and can also be used as additives
Compare

Technical Data Sheet

Basic performance	Test Condition	Test Method	Test Result
melt mass-flow rate			合格｜3.5±0.9 g/10min
density			优级｜0.939±0.003 g/cm3
	density			一级｜0.939±0.003 g/cm3
	density	density			合格｜0.918±0.004 g/cm3
melt mass-flow rate			优级｜3.5±0.5 g/10min
melt mass-flow rate	melt mass-flow rate			一级｜3.5±0.7 g/10min

Other performance	Test Condition	Test Method	Test Result
cleanliness			优级｜≤10 个/kg
	cleanliness			一级｜≤20 个/kg
	cleanliness	cleanliness			合格｜≤40 个/kg

Mechanical properties	Test Condition	Test Method	Test Result
tensile yield strength			优级｜≥13 MPa
	tensile yield strength			一级｜≥13 MPa
	tensile yield strength	tensile yield strength			合格｜≥13 MPa
tensile elongation at break			优级｜≥300 %
	tensile elongation at break			一级｜≥300 %
	tensile elongation at break	tensile elongation at break			合格｜≥300 %

Thermal performance	Test Condition	Test Method	Test Result
brittle temperature			优级｜≤-60 ℃
	brittle temperature			一级｜- ℃
	brittle temperature	brittle temperature			合格｜- ℃

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top