PC 2805 021139 COVESTRO GERMANY

185

Form：Granules | Grade：Light diffusion level

Properties:

Medium viscosityMedium viscosityFor general injection mol

Typical Applications:

Automotive ApplicationsElectrical applicationsIndustrial applicationsUsed for industrial accessoriesAutomotive electronic componentsElectronic and electrical accessories; ul certific

Supplier(2)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Automotive Applications \| Electrical applications \| Industrial applications \| Used for industrial accessories \| Automotive electronic components \| Electronic and electrical accessories; ul certific
Properties:	Medium viscosity \| Medium viscosity \| For general injection mol

Certificates

No Data...

Technical Data Sheet

other	Test Condition	Test Method	Test Result	Test Unit
density	--	ISO 1183	1200	kg/m2
Water absorption rate	23℃：50%rh，静态均衡值	ISO 62	0.12	%
Water absorption rate	Water absorption rate	在23℃水中，Saturation值	ISO 62	0.30	%
Specific properties of raw materials	Test Condition	Test Method	Test Result	Test Unit
Transmittance rate	1毫米	ISO 13468-2	89	%
Refractive index	过程A	ISO 489	1.586	--
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile creep modulus	23℃/50%r.h 1hr	ISO 899-1	2200	MPa
Fracture strain	23℃/50%r.h 5毫米/分钟	ISO 527-1-2	--	%
Tensile creep modulus	23℃/50%r.h 1000hr	ISO 899-1	1900	MPa
Bending modulus	23℃/50%r.h 2毫米/分钟	ISO 179	2400	MPa
Charpy Notched Impact Strength	23℃/50%r.h	ISO 179/1eU	N	kJ/m²
Charpy Notched Impact Strength	Charpy Notched Impact Strength	23℃/50%r.h ；3毫米	kJ/m²	参照ISO 179/1eA	75P(C)
Impact strength of cantilever beam gap	23℃/50%r.h ；3.2毫米	kJ/m²	参照ISO 180/1eA	85P(C)
Maximum destructive power	23℃/50%r.h	ISO 6603-2	5400	N
tensile strength	23℃/50%r.h，Break	ISO 6603-2	60	J
Fracture stress	23℃/50%r.h 5毫米/分钟	ISO 527-1-2	--	MPa
Elongation at Break	23℃/50%r.h 50毫米/分钟	ISO 527-1-2	＞50	%
Tensile strain	23℃/50%r.h 50毫米/分钟，Yield	ISO 527-1-2	6.1	%
Tensile stress	23℃/50%r.h 50毫米/分钟，Yield	ISO 527-1-2	66	MPa
Tensile modulus	23℃/50%r.h 1毫米/分钟	ISO 527-1-2	2400	MPa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Glass transition temperature	10℃/毫米	ISO 11357-1-2	145	℃
Vicat softening temperature	50N；50℃/hr	ISO 306	145	℃
Linear coefficient of thermal expansion	23-55℃，垂直	ISO 11359-1-2	0.65	10-4/K
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	23-55℃，Flow	ISO 11359-1-2	0.65	10-4/K
UL flame retardant rating	1.5毫米	UL 94	V-2	级
UL flame retardant rating	UL flame retardant rating	厚度	UL 94	HB(2.5)	级
Extreme Oxygen Index	A溶液	ISO 4589-2	27	%
Glow wire combustion index (GWFI)	1.5毫米	IEC 60695-2-12	850	℃
Glow wire combustion index (GWFI)	Glow wire combustion index (GWFI)	1.0毫米	IEC 60695-2-12	930	℃
Glow wire ignition temperature (GWIT)	1.5毫米	IEC 60695-2-13	875	℃
Glow wire ignition temperature (GWIT)	Glow wire ignition temperature (GWIT)	3.0毫米	IEC 60695-2-13	875	℃
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate	60602；500bar，垂直	ISO 294-4	0.7	%
Shrinkage rate	Shrinkage rate	60602；500bar，Flow	ISO 294-4	0.65	%
melt mass-flow rate	300℃；1.2kg	ISO 1133	9.5	cm3/(10分钟)
melt mass-flow rate	melt mass-flow rate	250℃；2.16kg	ISO 1133	--	cm3/(10分钟)
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Compared to the Leakage Traceability Index (CTI)	23℃/50%r.h 方法A	IEC 60112	250	等级
Volume resistivity	23℃/50%r.h	IEC 60093	1E+14	Ohm.m
Dielectric constant	23℃/50%r.h 100Hz	IEC 60250	3.1	--
Dissipation factor	23℃/50%r.h 100Hz	IEC 60250	5	10-4
Dielectric constant	23℃/50%r.h 1MHz	IEC 60250	3.0	--
Dissipation factor	23℃/50%r.h 1MHz	IEC 60250	90	10-4
Dielectric strength	23℃/50%r.h 1毫米	IEC 60243-1	34	kv/毫米
Surface resistivity	23℃/50%r.h	IEC 60093	1E+16	Ohm

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Supplier Join

Get App

Top

PC 2805 021139 COVESTRO GERMANY

Product Description

Certificates

Technical Data Sheet

Sourcing & Prices

Selling & Verification

Explore Materials

Price Index