
TPE G7970-9 SUZHOU GLS
10
Form:Granules
Properties:
ColoringRecyclableUV resistanceOzone resistant
Typical Applications:
sheetpartsPersonal careProfileNon specific food applicationspackingSoft handleSoft touch applicationHousehold goodsWrapping moldingFood service sectorConsumer product application fieldKitchen utensilsWasher
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | sheet | parts | Personal care | Profile | Non specific food applications | packing | Soft handle | Soft touch application | Household goods | Wrapping molding | Food service sector | Consumer product application field | Kitchen utensils | Washer |
| Properties: | Coloring | Recyclable | UV resistance | Ozone resistant |
Certificates
No Data...
Technical Data Sheet
| Filling analysis | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Apparent viscosity | 200°C,11200sec^-1 | ASTM D3835 | 9.90 | Pa·s |
| elastomer | Test Condition | Test Method | Test Result | Test Unit |
| Permanent compression deformation | 23°C,22hr | ASTM D395B | 20 | % |
| tensile strength | 100%Strain,23°C | ASTM D412 | 2.62 | Mpa |
| 300%Strain,23°C | ASTM D412 | 3.10 | Mpa | |
| Break,23°C | ASTM D412 | 6.58 | Mpa | |
| elongation | Break,23°C | ASTM D412 | 720 | % |
| tear strength | ASTM D624 | 28.0 | kN/m | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| melt mass-flow rate | 190°C/2.16kg | ASTM D1238 | 1.0 | g/10min |
| 200°C/5.0kg | ASTM D1238 | 36 | g/10min | |
| Shrinkage rate | MD | ASTM D955 | 0.60-1.2 | % |
| melt mass-flow rate | 200°C/5.0kg | ASTM D1238 | 54 | g/10min |
| hardness | Test Condition | Test Method | Test Result | Test Unit |
| Shore hardness | ShoreA,10Sec | ASTM D2240 | 70 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.