Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTMD792 | 1.41 g/cm³ |
| Water absorption rate | | ASTMD570 | 0.22 % |
| Water absorption rate | | ASTMD570 | 0.80 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | | ASTMD785 | 86 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | HB |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ASTMD638 | 2620 MPa |
| tensile strength | | ASTMD638 | 60.7 MPa |
| elongation | | ASTMD638 | 25 % |
| Flexural modulus | | ASTMD790 | 2480 MPa |
| bending strength | | ASTMD790 | 75.8 MPa |
| compressive strength | | ASTMD695 | 31.0 MPa |
| Itself - Dynamic | | 0.21 |
| Wear factor | | ASTMD3702 | 130 10^-8mm³/N·m |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Suspended wall beam without notch impact strength | | ASTMD256 | 53 J/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Volume resistivity | | ASTMD257 | 1E+14 ohms·cm |
| dielectric strength | | ASTMD149 | 20 kV/mm |
| dielectric constant | | ASTMD150 | 3.70 |
| Dissipation Factor | | ASTMD150 | 1E-03 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| maximum service temperature | | UL746B | 91 °C |
| | ASTMD648 | 158 °C |
| | ASTMD648 | 110 °C |
| melting temperature | | ASTMD2133 | 165 °C |
| | ASTMD696 | 8.5E-05 cm/cm/°C |
| maximum service temperature | | | 141 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare