POM 23P DUPONT USA

Form：Granules | Grade：Injection grade

Properties:

High temperature resistanwear resistant

Typical Applications:

Fitness equipmentAutomotive components

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Fitness equipment \| Automotive components
Properties:	High temperature resistan \| wear resistant

Certificates

No Data...

Technical Data Sheet

other	Test Condition	Test Method	Test Result	Test Unit
characteristic			均聚甲醛
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap		ASTM D-256/ISO R180	80	kg/cm
Bending modulus		ASTM D-790/ISO 178	30000	kg/cm
elongation	Break	ASTM D-638/ISO R527	35	%
tensile strength		ASTM D-638/ISO R527	640	kg/cm
Impact strength of cantilever beam gap		ASTM D256/ISO 179	80	kg·cm/cm(J/M)ft·lb/in
Elongation at Break		ASTM D638/ISO 527	35	%
tensile strength		ASTM D638/ISO 527	640	kg/cm²(MPa)[Lb/in²]
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	HDT	ASTM D-648/ISO 75	133	°C
Hot deformation temperature	Hot deformation temperature	0.46MPa	ASTM D-648/ISO 75	168	°C
Melting temperature		ASTM D-3418	175	°C
Hot deformation temperature	HDT	ASTM D648/ISO 75	168	℃（℉）
Hot deformation temperature	Hot deformation temperature	HDT	ASTM D648/ISO 75	133	℃（℉）
Melting temperature			175	℃（℉）
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ASTM D792/ISO 1183	1.42

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top