PA66 Vydyne® ECO315

Properties:
low density
Lubricity
Elongated elongation rate
Resistance to stress crac
Good demolding performanc
Ductility
Good flexibility
Halogen-free
Flame retardant
Usages:
Electrical field
Electronic field
Movable hinge
Spool
Electrical components
Fasteners
printed circuit board
Electrical enclosure
Switch panel
Lighting applications
Electrical appliances
Laptop case
Industrial applications
Automotive sector
Compare
View Prices

Technical Data Sheet

physical property	Test Condition	Test Method	Test Result
Shrinkage rate		ISO294-4	1.4 %
Shrinkage rate	Shrinkage rate		ISO294-4	1.2 %
Water absorption rate		ISO62	0.80 %
Water absorption rate	Water absorption rate		ISO62	2.3 %

flammability	Test Condition	Test Method	Test Result
UL flame retardant rating		UL94	V-0
	UL flame retardant rating		UL94	V-0
		UL flame retardant rating		UL94	V-0
		UL flame retardant rating	UL flame retardant rating		UL94	V-0
Burning wire flammability index		IEC60695-2-12	960 °C
	Burning wire flammability index		IEC60695-2-12	960 °C
		Burning wire flammability index		IEC60695-2-12	960 °C
		Burning wire flammability index	Burning wire flammability index		IEC60695-2-12	960 °C
Hot filament ignition temperature		IEC60695-2-13	875 °C
	Hot filament ignition temperature		IEC60695-2-13	875 °C
		Hot filament ignition temperature		IEC60695-2-13	775 °C
		Hot filament ignition temperature	Hot filament ignition temperature		IEC60695-2-13	725 °C
Limiting Oxygen Index		ISO4589-2	29 %

Impact resistance	Test Condition	Test Method	Test Result
Impact strength of simply supported beam without notch		ISO179/1eU	NoBreak
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch		ISO179/1eU	NoBreak

Mechanical properties	Test Condition	Test Method	Test Result
Tensile modulus		ISO527-2	5000 Mpa
Tensile stress		ISO527-2	75.0 Mpa
Tensile strain		ISO527-2	5.5 %
Tensile strain	Tensile strain		ISO527-2	25 %
Flexural modulus		ISO178	3200 Mpa
bending strength		ISO178	92.0 Mpa
Poisson's ratio		ISO527-2	0.40

Electrical performance	Test Condition	Test Method	Test Result
Hot wire ignition (HWI)		UL746	PLC 4
	Hot wire ignition (HWI)		UL746	PLC 4
	Hot wire ignition (HWI)	Hot wire ignition (HWI)		UL746	PLC 3
VolumeResistivity		IEC60093	1E+11 ohms·cm
dielectric strength		IEC60243	13 KV/mm
arc resistance		ASTMD495	PLC 5
CTI		IEC60112	600 V
High arc combustion index (HAI)		UL746	PLC 0
	High arc combustion index (HAI)		UL746	PLC 0
		High arc combustion index (HAI)		UL746	PLC 0
		High arc combustion index (HAI)	High arc combustion index (HAI)		UL746	PLC 0
High Voltage Arc Traceability Rate (HVTR)		UL746	PLC 1
Hot wire ignition (HWI)		UL746	PLC 4

Thermal performance	Test Condition	Test Method	Test Result
Heat distortion temperature		ISO75-2/B	225 °C
Heat distortion temperature	Heat distortion temperature		ISO75-2/A	65.0 °C
melting temperature		ISO11357-3	244 °C
		ISO11359-2	1.1E-04 cm/cm/°C
			ISO11359-2	1.1E-04 cm/cm/°C
RTI Elec		UL746	130 °C
	RTI Elec		UL746	130 °C
		RTI Elec		UL746	130 °C
		RTI Elec	RTI Elec		UL746	130 °C
RTI Imp		UL746	65.0 °C
	RTI Imp		UL746	65.0 °C
		RTI Imp		UL746	85.0 °C
		RTI Imp	RTI Imp		UL746	85.0 °C
RTI Str		UL746	100 °C
	RTI Str		UL746	100 °C
		RTI Str		UL746	100 °C
		RTI Str	RTI Str		UL746	110 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

PA66 Vydyne® ECO315

Technical Data Sheet

You May Like