
Polyolefin, Unspecified FRAGOM PR/900 CROSSPOLIMERI ITALY
Product Description
Certificates(0)
Datasheet
Product Description
Certificates
No Data...
Technical Data Sheet
| flammability | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Corrosion of flue gas | pH | IEC 60754-2 | >4.50 | |
| Temperature index (combustion) | NES715 | 300 | °C | |
| HalogenContent | IEC 60754-1 | 0 | % | |
| Extreme Oxygen Index | ASTM D2863 | 42 | % | |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Tensile strain | Break | IEC 60811 | 180 | % |
| tensile strength | Yield | IEC 60811 | 12.5 | MPa |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| thermosetting | 80°C,穿透 | IEC 60811 | 35 | % |
| ColdElongation | -25°C | 40 | % | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| melt mass-flow rate | 190°C/21.6kg | ASTM D1238 | 29 | g/10min |
| 160°C/21.6kg | ASTM D1238 | 12 | g/10min | |
| density | ASTM D792 | 1.52 | g/cm³ | |
| hardness | Test Condition | Test Method | Test Result | Test Unit |
| Shore hardness | ShoreD | ASTM D2240 | 45 | |
| aging | Test Condition | Test Method | Test Result | Test Unit |
| Tensile stress change rate | 70°C,4hr,在SAE20油中,Break | IEC 60811 | -8.0 | % |
| Change rate of tensile strength in air | 70°C,4hr,在SAE20油中 | IEC 60811 | -4.0 | % |
| Tensile stress change rate | 110°C,168hr,Break | IEC 60811 | -15 | % |
| Change rate of tensile strength in air | 110°C,168hr | IEC 60811 | 5.0 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.